From the year 1977 and up until the year 1979, the Lincoln Mark V was sold by Lincoln, the luxury division of the Ford Motor Company. The Lincoln Mark V was sold and marketed as a large coupe. It was only during the mentioned model years did the Lincoln Mark V have the opportunity to roam the streets.
Looking at it, the Lincoln Mark V was just like the previous Lincoln Mark IV, only this time it held a coupe of refinements and received a couple of restyling. The previous vehicle sported a rounded design. The Lincoln Mark V now was built and constructed to be more square and was sharper when it came to its edges. This was perhaps due to the fact that during that time, the sharp edged look was the in thing in the automobile world. Also, instead of the 460 cubic inch Ford 385 engine, the Lincoln Mark V was equipped with the Ford 400 cubic inch small block engine. The vehicle was also crafted to be much more angular, longer, and pretty much lower than its predecessors. It was given more trunk space and was much lighter compared to the Lincoln Mark IV. In fact, it only weight 4,650 pounds which was some 500 pounds lighter. It was crafted on a wheelbase that measured some 120 inches. With that, the car was then completed to be much longer. It was stretched to 230 inches. In short, the Lincoln Mark V was a reskinned Lincoln Mark IV.
However, this vehicle had its own drawbacks, thus the very reason why it existed for such a short period of time. In 1978, it was tested by Auto Motor Und Sport which was Germany’s leading car magazine. When the results came out, the magazine found out that the Lincoln Mark V had an average mile per gallon of not more than 7. Even up to this day, this vehicle still holds the Auto Motor Und Sport record for being the least fuel efficient vehicle. This actually brought the Ford Motor Company very close at violating the Corporate Average Fuel Economy laws during that period.
People who were interested in purchasing the said vehicle would have to have at least $11,396 so as to be able to own one. Aside from this, the Lincoln Mark V’s customers and patrons were given options like a couple of trim levels for choices. Also, this line of vehicles was given to a couple of designers. These designers – Givenchy, Bill Blass, Cartier, and Pucci – were given the chance to personally design these vehicles.
Sunday, January 31, 2010
1917 Woods Dual Power
The first hybrid gas electric car did not come out in 1983, but in 1917. The Woods Dual Power was built by the Woods Motor Vehicle Company of Chicago. Because the gas engine was so rough, but supplied more power and electric cars were smoother, but had limited range, the Woods Motor Vehicle Company wanted to supply a car that gave you the best of both worlds.
The best part is, it was a full hybrid (listen up GM) with regenerative braking. The engine was a parallel hybrid that included a 12-hp, 4-cylinder gasoline engine as an auxiliary drive system in addition to the electric drive train. The electric engine could propel the car up to 20 mph. Together with the gas engine, the dual wood power could get up to 35 mph.
The gas engine and electric engine were connected using a magnetic clutch. The gas engine became magnetized when activated (by a lever controlled by the driver). The copper disk was pulled against the flywheel connecting the electric motor to the gas engine.
Only the electric motor could be used while going in reverse. Why? Because the engine had no clutch and so the gas engine had no gears!
The car battery designed for this car was about half the size of the batteries in other electric cars of the time. Once the car got up to 20 mph, the gas engine could be engaged, allowing the electric motor and gas motor to work together. The battery could be recharged or discharged by another lever. Recharging was done by the gas motor (at speeds over 6 mph) or by braking on level ground or when coasting down hills. A conventional brake pedal was only used at speeds of less than 6 mph.
Available for only $2650 (remember this was 1917). Wire wheels were a luxury, costing an extra $25. Or you could 'pimp' your vehicle out for another $100 (paint and trim).
Ultimately, the first hybrid was a commercial failure. It was built only in 1917 and 1918. It was too expensive, too slow, and too difficult to service to be a commercial success.
The best part is, it was a full hybrid (listen up GM) with regenerative braking. The engine was a parallel hybrid that included a 12-hp, 4-cylinder gasoline engine as an auxiliary drive system in addition to the electric drive train. The electric engine could propel the car up to 20 mph. Together with the gas engine, the dual wood power could get up to 35 mph.
The gas engine and electric engine were connected using a magnetic clutch. The gas engine became magnetized when activated (by a lever controlled by the driver). The copper disk was pulled against the flywheel connecting the electric motor to the gas engine.
Only the electric motor could be used while going in reverse. Why? Because the engine had no clutch and so the gas engine had no gears!
The car battery designed for this car was about half the size of the batteries in other electric cars of the time. Once the car got up to 20 mph, the gas engine could be engaged, allowing the electric motor and gas motor to work together. The battery could be recharged or discharged by another lever. Recharging was done by the gas motor (at speeds over 6 mph) or by braking on level ground or when coasting down hills. A conventional brake pedal was only used at speeds of less than 6 mph.
Available for only $2650 (remember this was 1917). Wire wheels were a luxury, costing an extra $25. Or you could 'pimp' your vehicle out for another $100 (paint and trim).
Ultimately, the first hybrid was a commercial failure. It was built only in 1917 and 1918. It was too expensive, too slow, and too difficult to service to be a commercial success.
50 Years of Power
A carryover from 2004, the 2005 Ford Thunderbird was the last of its kind to be manufactured. The last time it rolled off the Ford Motor Company’s manufacturing plants was also the time of the vehicle’s fiftieth anniversary.
This 2005 Ford Thunderbird is a luxury convertible that has been available in three trims that ranges from the Deluxe package to the 50th anniversary package. It has the capacity to take in a maximum of two passengers, and sports two doors. Upon its introduction, this 2005 Ford Thunderbird model came equipped with a standard engine of 3.9 liters, V8, and 280 horsepower that could take in 18 mpg in the city, and 24 mpg on highway cruising. Also standard for this luxury convertible is a five-speed automatic transmission that has overdrive.
This last Thunderbird convertible to be produced still contains the cool and evocative styling that its descendants have bore. It also still holds its heritage of being a roadster with perennial style, loads of power, and great interior roominess and space. However, convertibles who have lived for fifty years also received changes so much so that the 2005 Ford Thunderbird sports an open-air driving, new colors for its interior and exterior, and a new aluminum trim for its doors and center stack.
As per the 2005 Ford Thunderbird’s interior, this vehicle comes with air conditioning with dual-zone automatic climate controls, a power tilt/telescope leather-wrapped steering wheel that has radio controls mounted on it, a cruise control, leather upholstery on 6-way power bucket seats, power mirrors, window locks, door locks, a remote keyless entry system, AM/FM/CD with an in-dash 6-disc changer, a power convertible top, a universal garage door opener, and automatic headlights. On the outside, this luxury convertible could be owned with a power-folding soft top with a heated rear window or with a removable hardtop with trademark porthole windows.
As per safety and security, this luxury convertible has made sure that these features are not overlooked. The vehicle has front airbags, side airbags, and a combination of head-and-chest side airbags, thus making the 2005 Ford Thunderbird the first convertible manufactured by Ford to come equipped with this. Aside from that, the vehicle also has an anti-theft system, the Ford’s Smart Locks system, the LATCH child seat system, a perimeter alarm that goes along with an LED indicator, and a glow-in-the-dark emergency trunk release handle.
All of Ford Thunderbird’s parts and Ford car parts needs could be easily located at Auto Parts Discount. Top of the line Ford Thunderbird parts and Ford auto parts could found here that are guaranteed to fit Ford vehicles. They also match the quality and performance of Ford vehicles.
In a nutshell, the 2005 Ford Thunderbird comes with new exterior colors that include bronze and medium steel blue that has replaced merlot, vintage mint green, and light ice blue metallic. Aside from that it also sports new partial interior color packages like medium steel blue and torch red. The convertible also has a new style using aluminum trim on its doors and center stack. And lastly, the 2005 Ford Thunderbird contains seatback map pockets for owner’s use.
This 2005 Ford Thunderbird is a luxury convertible that has been available in three trims that ranges from the Deluxe package to the 50th anniversary package. It has the capacity to take in a maximum of two passengers, and sports two doors. Upon its introduction, this 2005 Ford Thunderbird model came equipped with a standard engine of 3.9 liters, V8, and 280 horsepower that could take in 18 mpg in the city, and 24 mpg on highway cruising. Also standard for this luxury convertible is a five-speed automatic transmission that has overdrive.
This last Thunderbird convertible to be produced still contains the cool and evocative styling that its descendants have bore. It also still holds its heritage of being a roadster with perennial style, loads of power, and great interior roominess and space. However, convertibles who have lived for fifty years also received changes so much so that the 2005 Ford Thunderbird sports an open-air driving, new colors for its interior and exterior, and a new aluminum trim for its doors and center stack.
As per the 2005 Ford Thunderbird’s interior, this vehicle comes with air conditioning with dual-zone automatic climate controls, a power tilt/telescope leather-wrapped steering wheel that has radio controls mounted on it, a cruise control, leather upholstery on 6-way power bucket seats, power mirrors, window locks, door locks, a remote keyless entry system, AM/FM/CD with an in-dash 6-disc changer, a power convertible top, a universal garage door opener, and automatic headlights. On the outside, this luxury convertible could be owned with a power-folding soft top with a heated rear window or with a removable hardtop with trademark porthole windows.
As per safety and security, this luxury convertible has made sure that these features are not overlooked. The vehicle has front airbags, side airbags, and a combination of head-and-chest side airbags, thus making the 2005 Ford Thunderbird the first convertible manufactured by Ford to come equipped with this. Aside from that, the vehicle also has an anti-theft system, the Ford’s Smart Locks system, the LATCH child seat system, a perimeter alarm that goes along with an LED indicator, and a glow-in-the-dark emergency trunk release handle.
All of Ford Thunderbird’s parts and Ford car parts needs could be easily located at Auto Parts Discount. Top of the line Ford Thunderbird parts and Ford auto parts could found here that are guaranteed to fit Ford vehicles. They also match the quality and performance of Ford vehicles.
In a nutshell, the 2005 Ford Thunderbird comes with new exterior colors that include bronze and medium steel blue that has replaced merlot, vintage mint green, and light ice blue metallic. Aside from that it also sports new partial interior color packages like medium steel blue and torch red. The convertible also has a new style using aluminum trim on its doors and center stack. And lastly, the 2005 Ford Thunderbird contains seatback map pockets for owner’s use.
Saturday, January 30, 2010
30 Years And Still Strong
The Mazda 929, also sold as the Efini MS-9, is a full size luxury car. The model Mazda 929 was first introduced back in 1973.
The vehicle was crafted in Japan; it was as big as a coupe, sedan, or station wagon. This line had a 1.8 liter incline four Mazda 1800 engine; the engine was capable of a whopping eighty three horse power output. Since its introduction the Mazda 929 has had five different engines between the years 1973 to 1981.
The second generation Mazda emerged in 1981. It had been sold as a large front engine rear wheel drive sedan. It also used the new HB platform as a base which was also shared with the Mazda Cosmo. The new Mazda has seen three different engines in its life time. The third generation came about a few years later.
This new version had a pillared four door sedan along with a larger hard top that has four doors and no pillars. The engine was even upgraded to a double overhead Cam that had twenty four valves. That would in turn increase its fuel economy, performance and reliability.
The last generation of Mazda 929s still has the same luxury and is considered a premium sedan. It has been redesigned and has a more rounded flowing body. There are many add ons as well. For instance, they added five more horsepower to the engine. They have added dual air bags; a glass moon roof has replaced the metal unit. The premium package includes a wood console trim and rear armrest storage compartment. Leather upholstery has been added, even a remote keyless system and wood interior trim. This vehicle has been ranked the highest among its class.
The Mazda 929 has changed quite a bit in these thirty years, but Mazda still gives us the safety and luxury that all customers want.
The vehicle was crafted in Japan; it was as big as a coupe, sedan, or station wagon. This line had a 1.8 liter incline four Mazda 1800 engine; the engine was capable of a whopping eighty three horse power output. Since its introduction the Mazda 929 has had five different engines between the years 1973 to 1981.
The second generation Mazda emerged in 1981. It had been sold as a large front engine rear wheel drive sedan. It also used the new HB platform as a base which was also shared with the Mazda Cosmo. The new Mazda has seen three different engines in its life time. The third generation came about a few years later.
This new version had a pillared four door sedan along with a larger hard top that has four doors and no pillars. The engine was even upgraded to a double overhead Cam that had twenty four valves. That would in turn increase its fuel economy, performance and reliability.
The last generation of Mazda 929s still has the same luxury and is considered a premium sedan. It has been redesigned and has a more rounded flowing body. There are many add ons as well. For instance, they added five more horsepower to the engine. They have added dual air bags; a glass moon roof has replaced the metal unit. The premium package includes a wood console trim and rear armrest storage compartment. Leather upholstery has been added, even a remote keyless system and wood interior trim. This vehicle has been ranked the highest among its class.
The Mazda 929 has changed quite a bit in these thirty years, but Mazda still gives us the safety and luxury that all customers want.
18 Simple Ways To Save Money On Your Car
After you get recommendations for honest mechanics, call around to check out the prices for certain jobs. It’s always smart to get a second opinion.
How about some preventative medicine? Keep your gas tank filled. This will help you avoid the gas line freezing up in cold weather. Also, driving on “fumes” allows little pieces of dirt at the bottom of your gas tank to run through the fuel lines with the last drops of gas. This debris clogs up the fuel filter and can cause carburettor damage as well.
Sometimes a problem with your car’s electrical system results from a simple blown fuse. Check to see if you have any blown fuses before investing in a tow truck! Keep track of how much oil your car uses. A sudden change in oil consumption means you need to see a technician. Save your brakes by having your brake fluid changed every 30,000 miles. Check your tire pressure once a month. This simple maintenance check can add up savings at the gas pump!
Stop and go traffic causes excess wear and tear on your vehicle. Go ahead and give your car a nice twenty minute ride at 55 mph on the highway every couple weeks if you “major” in short trips.
There are other ways to save money on car expenses. Let’s look at the insurance payments.
If you’ve budgeted for possible out-of-pocket expenses in case of a car accident, you might want to consider increasing your insurance deductible to $500. This will lower the cost of your insurance.
Talk to your insurance agent. If your car is as old as the hills, you might want to drop collision coverage to save money.
Car insurance companies offer a variety of discounts. Ask your agent if the company offers reductions for driver training courses, anti-lock brakes, car alarms, air bags, mature drivers, good students or maintaining a good driving record.
Before you purchase from a dealer, ask about the dealer's return policy, get it in writing and read it carefully. Dealers are not required by law to give used car buyers a three-day right to cancel.
Each 5 mph you drive over 60 mph is like paying an additional $0.10 per gallon for gas.
In most cases, using cruise control on the highway will save gas.
Replacing a clogged air filter can improve your car's gas mileage by as much as 10 percent. This isn’t going to cost you an arm or leg either.
Do your homework when buying a car from an auction. Many vehicles that have been damaged by floods and hurricanes are going on the market. These won’t last long – leaving you with a flood of bills. Be a little concerned if the carpet looks too new, and check carefully for signs of rust.
If you use your car for business, keep track of miles travelled so that you can use this for a tax deduction. Get more info at irs.gov.
When you consider all the ways you can save money on your current vehicle, you might be persuaded to put away the extra each month for a new car down the road!
How about some preventative medicine? Keep your gas tank filled. This will help you avoid the gas line freezing up in cold weather. Also, driving on “fumes” allows little pieces of dirt at the bottom of your gas tank to run through the fuel lines with the last drops of gas. This debris clogs up the fuel filter and can cause carburettor damage as well.
Sometimes a problem with your car’s electrical system results from a simple blown fuse. Check to see if you have any blown fuses before investing in a tow truck! Keep track of how much oil your car uses. A sudden change in oil consumption means you need to see a technician. Save your brakes by having your brake fluid changed every 30,000 miles. Check your tire pressure once a month. This simple maintenance check can add up savings at the gas pump!
Stop and go traffic causes excess wear and tear on your vehicle. Go ahead and give your car a nice twenty minute ride at 55 mph on the highway every couple weeks if you “major” in short trips.
There are other ways to save money on car expenses. Let’s look at the insurance payments.
If you’ve budgeted for possible out-of-pocket expenses in case of a car accident, you might want to consider increasing your insurance deductible to $500. This will lower the cost of your insurance.
Talk to your insurance agent. If your car is as old as the hills, you might want to drop collision coverage to save money.
Car insurance companies offer a variety of discounts. Ask your agent if the company offers reductions for driver training courses, anti-lock brakes, car alarms, air bags, mature drivers, good students or maintaining a good driving record.
Before you purchase from a dealer, ask about the dealer's return policy, get it in writing and read it carefully. Dealers are not required by law to give used car buyers a three-day right to cancel.
Each 5 mph you drive over 60 mph is like paying an additional $0.10 per gallon for gas.
In most cases, using cruise control on the highway will save gas.
Replacing a clogged air filter can improve your car's gas mileage by as much as 10 percent. This isn’t going to cost you an arm or leg either.
Do your homework when buying a car from an auction. Many vehicles that have been damaged by floods and hurricanes are going on the market. These won’t last long – leaving you with a flood of bills. Be a little concerned if the carpet looks too new, and check carefully for signs of rust.
If you use your car for business, keep track of miles travelled so that you can use this for a tax deduction. Get more info at irs.gov.
When you consider all the ways you can save money on your current vehicle, you might be persuaded to put away the extra each month for a new car down the road!
10 Tips For Getting Your Car Ready For Warm Weather Driving
The first warm weekend of the season traditionally triggers a symphony of cleaning products, vacuums and garden hoses. But while you might be in a hurry to put a shine on your vehicle, it's equally important to make sure it's ready for the warm weather on the inside as well as the outside.
"The most critical areas to check after the harsh winter months are engine fluids, radiator hoses, belts, tires and brakes," says Pat Goss, host of PBS' "MotorWeek" and Washington Post automotive columnist. "Adequately preparing these key areas of the car before the weather warms up will not only keep you safe while driving, they'll help prevent costly repairs."
After battling months of snow, sleet and icy roads, your vehicle is undoubtedly in need of some serious care. To make your spring trouble-free, follow this 10-point checklist for safety, dependability and fuel economy.
1. Remove your winter tires and rotate all-season radials-If you have winter tires, it's time to store them away. If you don't have winter tires, it's equally important to have all-season tires rotated or switched out for new ones.
2. Brake check-After a blistering winter, be sure to check your brakes. Warning signs include excessive grinding, squealing, screeching or chatter.
3. Wiper blades check-Wipers work hard over the winter months, wiping away dirt and debris on your windshield. Replace them in the spring before a shower makes it difficult to see.
4. Clean the underbody-In addition to washing the exterior, be sure to spray the underbody of your vehicle and underneath the rear and front bumpers to rinse away any salt build-up, which can lead to erosion and rusting. Use a high-pressure sprayer or garden hose for best results.
5. Apply a protectant-Any vinyl surface, such as the seats and the steering wheel, is susceptible to cracking, sun damage, and fading-so be sure to apply a protectant at the beginning of the season and touch-up regularly.
6. Change your oil-Give some thought to the kind of motor oil you have in your engine. Fully synthetic oils, such as Mobil 1, are specifically designed to protect your engine in hot weather, while optimizing your engine's efficiency and reducing oil consumption. (For more information about Mobil 1, go to www.mobiloil.com.)
7. Check all fluids-In the winter months, fluids are easily depleted as your engine works harder in the colder weather. Make sure to check, top off or replace all fluids, including brake, transmission, coolant, power steering and windshield washer fluid.
8. Pressure test-Assess the pressure of the cooling system, and examine belts and hoses for wear or deterioration.
9. Interior clean-up-Vacuum and be sure to throw away any unwanted garbage that has hibernated under your seats over the winter. Now is also the time to store your winter car mats in the garage.
10. Wash your car-All vehicles regardless of the finish (clear coat, acrylic, enamel, etc.) require regular washing throughout the year. To preserve your car's shine and protect the surface, wax your vehicle once it has dried completely.
"The warm weather is here-so be sure to follow these simple tips to ensure vehicle dependability in the warm months ahead," says Goss. "By taking care of your vehicle, it will more likely take care of you. And it will do it for a lot less money."
"The most critical areas to check after the harsh winter months are engine fluids, radiator hoses, belts, tires and brakes," says Pat Goss, host of PBS' "MotorWeek" and Washington Post automotive columnist. "Adequately preparing these key areas of the car before the weather warms up will not only keep you safe while driving, they'll help prevent costly repairs."
After battling months of snow, sleet and icy roads, your vehicle is undoubtedly in need of some serious care. To make your spring trouble-free, follow this 10-point checklist for safety, dependability and fuel economy.
1. Remove your winter tires and rotate all-season radials-If you have winter tires, it's time to store them away. If you don't have winter tires, it's equally important to have all-season tires rotated or switched out for new ones.
2. Brake check-After a blistering winter, be sure to check your brakes. Warning signs include excessive grinding, squealing, screeching or chatter.
3. Wiper blades check-Wipers work hard over the winter months, wiping away dirt and debris on your windshield. Replace them in the spring before a shower makes it difficult to see.
4. Clean the underbody-In addition to washing the exterior, be sure to spray the underbody of your vehicle and underneath the rear and front bumpers to rinse away any salt build-up, which can lead to erosion and rusting. Use a high-pressure sprayer or garden hose for best results.
5. Apply a protectant-Any vinyl surface, such as the seats and the steering wheel, is susceptible to cracking, sun damage, and fading-so be sure to apply a protectant at the beginning of the season and touch-up regularly.
6. Change your oil-Give some thought to the kind of motor oil you have in your engine. Fully synthetic oils, such as Mobil 1, are specifically designed to protect your engine in hot weather, while optimizing your engine's efficiency and reducing oil consumption. (For more information about Mobil 1, go to www.mobiloil.com.)
7. Check all fluids-In the winter months, fluids are easily depleted as your engine works harder in the colder weather. Make sure to check, top off or replace all fluids, including brake, transmission, coolant, power steering and windshield washer fluid.
8. Pressure test-Assess the pressure of the cooling system, and examine belts and hoses for wear or deterioration.
9. Interior clean-up-Vacuum and be sure to throw away any unwanted garbage that has hibernated under your seats over the winter. Now is also the time to store your winter car mats in the garage.
10. Wash your car-All vehicles regardless of the finish (clear coat, acrylic, enamel, etc.) require regular washing throughout the year. To preserve your car's shine and protect the surface, wax your vehicle once it has dried completely.
"The warm weather is here-so be sure to follow these simple tips to ensure vehicle dependability in the warm months ahead," says Goss. "By taking care of your vehicle, it will more likely take care of you. And it will do it for a lot less money."
10 things every car buyer must know
Buying a car needs not just investment but deep thought. The market is overflowing with choices and temptations. Buyers need to think, what kind of car and can I afford it?
Think, what do I need transportation for right now and what will I need two years from now? Do I want a car as a status symbol or as something that makes my life easier? Will the car be a commuter vehicle, or to transport children? Would a van with cargo space and high clearance be more suitable for a growing family? Should the car be a two-wheel or four-wheel drive? What kind of terrain will I be driving in most of the time? Go through auto magazines as well as consumer reports to get a clear picture of the world of cars.
1. Work on your finances and determine what you need to spend each month on transportation. A car should not cost more than 10% of your net pay per month. If it is more, then consider leasing a car instead of buying one.
2. Before you finalize anything, find out what the target price is. Four figure discounts are available with almost every make.
3. Never sign an arbitration clause or blank financial forms. Try and get finance from a separate source, a bank or financial institution.
4. Haggling will get you a good deal apart from shopping around for finance. The market is competitive be sure to check dealer fiancé, high street, internet lenders, as well as other options.
5. Try and ensure a large down payment thereby reducing the loan to be paid. Work out your finances and choice of car such that the term of loan is for the shortest period.
6. Find out what buying incentives are on offer. These vary from audio systems to cash back offers, and 0% financing. Ask what extras and add ons will cost in addition to the price of the car.
7. Be sure to evaluate your old car independently if you are considering a trade in. Pay attention to ‘cost to change’, the difference between what the new car costs and what the old one is worth.
8. Find out about warranties, taxes, and insurance. These can eat into your budget.
9. Vet the contract well. Read the fine print. Make sure that paying off the loan before time will not carry any penalty.
10. Check out at least 3-4 dealers to gauge what the best offer is.
Test drive the vehicle before you finalize the deal and go through the car booklet page by page to understand all that the manufacturer needs to tell you. Be clear what is under warranty and what is not.
Never choose vehicle based on a picture or dream. It is not how you look in the car that’s important but how well the car will fulfill your needs. Be practical and sensible; do not buy a model because the dealership is offering a holiday for two or a low interest scheme. Identify a vehicle that suits your needs before subjecting yourself to an onslaught of marketing.
Think, what do I need transportation for right now and what will I need two years from now? Do I want a car as a status symbol or as something that makes my life easier? Will the car be a commuter vehicle, or to transport children? Would a van with cargo space and high clearance be more suitable for a growing family? Should the car be a two-wheel or four-wheel drive? What kind of terrain will I be driving in most of the time? Go through auto magazines as well as consumer reports to get a clear picture of the world of cars.
1. Work on your finances and determine what you need to spend each month on transportation. A car should not cost more than 10% of your net pay per month. If it is more, then consider leasing a car instead of buying one.
2. Before you finalize anything, find out what the target price is. Four figure discounts are available with almost every make.
3. Never sign an arbitration clause or blank financial forms. Try and get finance from a separate source, a bank or financial institution.
4. Haggling will get you a good deal apart from shopping around for finance. The market is competitive be sure to check dealer fiancé, high street, internet lenders, as well as other options.
5. Try and ensure a large down payment thereby reducing the loan to be paid. Work out your finances and choice of car such that the term of loan is for the shortest period.
6. Find out what buying incentives are on offer. These vary from audio systems to cash back offers, and 0% financing. Ask what extras and add ons will cost in addition to the price of the car.
7. Be sure to evaluate your old car independently if you are considering a trade in. Pay attention to ‘cost to change’, the difference between what the new car costs and what the old one is worth.
8. Find out about warranties, taxes, and insurance. These can eat into your budget.
9. Vet the contract well. Read the fine print. Make sure that paying off the loan before time will not carry any penalty.
10. Check out at least 3-4 dealers to gauge what the best offer is.
Test drive the vehicle before you finalize the deal and go through the car booklet page by page to understand all that the manufacturer needs to tell you. Be clear what is under warranty and what is not.
Never choose vehicle based on a picture or dream. It is not how you look in the car that’s important but how well the car will fulfill your needs. Be practical and sensible; do not buy a model because the dealership is offering a holiday for two or a low interest scheme. Identify a vehicle that suits your needs before subjecting yourself to an onslaught of marketing.
Friday, January 29, 2010
10 Good Reasons for taking Driving Lessons. A guide for the Irish Learner Driver.
In a driving context, most of the decisions that you take and the techniques that you employ, will have both an economic and a safety impact. The decision to take driving lessons is really a simple one but one that will have far reaching consequences well into the future. Most, if not all, poor or dangerous habits in today’s drivers stem from the lack of professional tuition at the outset. In this second in a series of articles designed to assist today’s learner drivers we will have a look at the benefits in taking Professional Tuition.
1. Taking lessons will greatly improve your chances of staying safe and accident free since providing you retain what you have been taught, you will be probably better than many motorists who have been driving for considerably longer. Lack of sufficient training, or even no training at all which is common in Ireland, will inevitably lead to accidents at a very early stage in the driving career. Accidents are to be avoided at all costs. After all isn’t the safety of the driver, the passengers and other road users the paramount priority?
2. A course of lessons at the start of your driving career and not one month from your Driving Test, will give you the confidence you need to continue the learning process, and will form the foundation for safe motoring.
3. Taking a course of lessons will give you the chance to be accepted by an insurance company for your first Insurance policy. In fact most companies will insist on a minimum number of lessons completed by a recognised school, before a son or daughter will be admitted onto a Parent’s policy.
4. On a very topical note, the Irish Insurer Hibernian, in conjunction with the Institute of Advanced Motorists, has extended its successful Ignition scheme to provisional license holders since January 2005.Learner drivers that pass the one hour driving assessment, will be offered a 21% reduction on their insurance. This is a substantial reduction for any new driver, particularly young males under 25 years of age, and well worth achieving. Just being in the possession of a provisional license will not suffice to pass this test. A course of lessons will be needed in order to achieve the required standard and the test should not be booked until quite a high level of both competence and confidence has been reached.
5. Passing the Department of Transport Driving Test, sooner rather than later, will result in further reductions in already high Insurance costs. Lessons taken just before the Driving Test will not cut it in today’s Test environment; there is just too much to learn if one wants to be successful first time out.
6. The long waiting list for the Irish Driving Test is a great inconvenience for many learner Drivers and also their Driving Instructors. The long wait is accentuated by the huge numbers of learners who do not prepare adequately with a professional school and then are forced to re sit their Test sometimes several times over. Career aspirations can easily be affected if the journey to a full License is overly prolonged.
7. Obtaining a full driving license promptly will speed up the reduction in your insurance premiums via your annual no claims bonus, providing of course you are not involved in any accidents.
8. As a fully licensed Driver you will have much greater opportunity to shop around for a competitive insurance quote, since there are only a very few companies who will insure provisional license holders and then only at a huge premium.
9. As an addition to item number 4 as a fully licensed Driver, you may apply for the more advanced Hibernian Ignition course, providing you are in your first five years of driving .This is a full day course, the cost of which can be recouped, if you pass the practical driving assessment at the end of the day. The reduction in insurance premium for the successful candidate can be upwards of 30%, so again very worthwhile .Drivers in this category should take a refresher course with a driving school to ensure that any bad habits or techniques are eradicated. Once again it is worth pointing out that the length of your driving experience is not a guarantee of success unless you started on the right foot to begin with!
10. If, in the early days of your working life you are unlucky enough to find yourself jobless through either, takeovers, cutbacks or closures, a full Driving License will enable you to pick up an interim job very quickly while you regroup and examine your future options. There is a shortage of drivers to fill current vacancies in Europe, particularly in the commercial sector so there are great opportunities for young qualified drivers who have been well trained.
Both career and promotional opportunities abound for the fully licensed driver in any organisation. Faced with two candidates of similar qualifications, an employer will naturally favour the person with the full license pretty much every time.
1. Taking lessons will greatly improve your chances of staying safe and accident free since providing you retain what you have been taught, you will be probably better than many motorists who have been driving for considerably longer. Lack of sufficient training, or even no training at all which is common in Ireland, will inevitably lead to accidents at a very early stage in the driving career. Accidents are to be avoided at all costs. After all isn’t the safety of the driver, the passengers and other road users the paramount priority?
2. A course of lessons at the start of your driving career and not one month from your Driving Test, will give you the confidence you need to continue the learning process, and will form the foundation for safe motoring.
3. Taking a course of lessons will give you the chance to be accepted by an insurance company for your first Insurance policy. In fact most companies will insist on a minimum number of lessons completed by a recognised school, before a son or daughter will be admitted onto a Parent’s policy.
4. On a very topical note, the Irish Insurer Hibernian, in conjunction with the Institute of Advanced Motorists, has extended its successful Ignition scheme to provisional license holders since January 2005.Learner drivers that pass the one hour driving assessment, will be offered a 21% reduction on their insurance. This is a substantial reduction for any new driver, particularly young males under 25 years of age, and well worth achieving. Just being in the possession of a provisional license will not suffice to pass this test. A course of lessons will be needed in order to achieve the required standard and the test should not be booked until quite a high level of both competence and confidence has been reached.
5. Passing the Department of Transport Driving Test, sooner rather than later, will result in further reductions in already high Insurance costs. Lessons taken just before the Driving Test will not cut it in today’s Test environment; there is just too much to learn if one wants to be successful first time out.
6. The long waiting list for the Irish Driving Test is a great inconvenience for many learner Drivers and also their Driving Instructors. The long wait is accentuated by the huge numbers of learners who do not prepare adequately with a professional school and then are forced to re sit their Test sometimes several times over. Career aspirations can easily be affected if the journey to a full License is overly prolonged.
7. Obtaining a full driving license promptly will speed up the reduction in your insurance premiums via your annual no claims bonus, providing of course you are not involved in any accidents.
8. As a fully licensed Driver you will have much greater opportunity to shop around for a competitive insurance quote, since there are only a very few companies who will insure provisional license holders and then only at a huge premium.
9. As an addition to item number 4 as a fully licensed Driver, you may apply for the more advanced Hibernian Ignition course, providing you are in your first five years of driving .This is a full day course, the cost of which can be recouped, if you pass the practical driving assessment at the end of the day. The reduction in insurance premium for the successful candidate can be upwards of 30%, so again very worthwhile .Drivers in this category should take a refresher course with a driving school to ensure that any bad habits or techniques are eradicated. Once again it is worth pointing out that the length of your driving experience is not a guarantee of success unless you started on the right foot to begin with!
10. If, in the early days of your working life you are unlucky enough to find yourself jobless through either, takeovers, cutbacks or closures, a full Driving License will enable you to pick up an interim job very quickly while you regroup and examine your future options. There is a shortage of drivers to fill current vacancies in Europe, particularly in the commercial sector so there are great opportunities for young qualified drivers who have been well trained.
Both career and promotional opportunities abound for the fully licensed driver in any organisation. Faced with two candidates of similar qualifications, an employer will naturally favour the person with the full license pretty much every time.
8 Signs That Your Car Has Pothole Damage
A pothole can be your car's worst enemy. These holes or pits on a road's surface can seriously damage a vehicle's ride-control system.
If you do drive over a pothole, the Car Care Council recommends that you have your car's shocks or struts checked to make sure they aren't damaged.
Shocks and struts control how vehicles ride and handle. According to the Car Care Council, the shock absorbers, or struts as they are referred to on late-model vehicles, act as a cushion to dampen the bouncing action of a car's springs. The springs absorb the road bumps; without them, the vehicle would continually bounce and bound down the road, making driving extremely difficult.
Shocks and struts also control spring and suspension movement to keep the tires in contact with the road. This affects steering, stability and braking. A broken shock or strut could alter the steering and handling of a vehicle and create driving dangers.
It's important to be aware of the warning signs that your vehicle's shocks or struts may need to be replaced.
* The vehicle rolls or sways on turns.
* The vehicle's front-end dives when braking.
* The vehicle's rear end squats when accelerating.
* The vehicle bounces or slides sideways on a winding, rough road.
* The vehicle "bottoms out" or thumps on bumps.
* The vehicle sits lower in the front or rear.
* The vehicle is leaking or has signs of physical damage, such as rusting or dents.
* There's a loss of directional control during sudden stops of the vehicle.
Many components affect a vehicle's handling. Having your car inspected, if you experience any of the above signs, is good preventive maintenance and can help its parts wear less and last longer.
"If you think you may have a worn out or broken shock or strut, don't wait," said Rich White, executive director of the Car Care Council. "Whether you replace it yourself or take your car to a professional service technician, this situation should be taken care of right away."
The Car Care Council is the source of information for the "Be Car Care Aware" campaign, educating consumers about the benefits of regular vehicle care, maintenance and repair.
If you do drive over a pothole, the Car Care Council recommends that you have your car's shocks or struts checked to make sure they aren't damaged.
Shocks and struts control how vehicles ride and handle. According to the Car Care Council, the shock absorbers, or struts as they are referred to on late-model vehicles, act as a cushion to dampen the bouncing action of a car's springs. The springs absorb the road bumps; without them, the vehicle would continually bounce and bound down the road, making driving extremely difficult.
Shocks and struts also control spring and suspension movement to keep the tires in contact with the road. This affects steering, stability and braking. A broken shock or strut could alter the steering and handling of a vehicle and create driving dangers.
It's important to be aware of the warning signs that your vehicle's shocks or struts may need to be replaced.
* The vehicle rolls or sways on turns.
* The vehicle's front-end dives when braking.
* The vehicle's rear end squats when accelerating.
* The vehicle bounces or slides sideways on a winding, rough road.
* The vehicle "bottoms out" or thumps on bumps.
* The vehicle sits lower in the front or rear.
* The vehicle is leaking or has signs of physical damage, such as rusting or dents.
* There's a loss of directional control during sudden stops of the vehicle.
Many components affect a vehicle's handling. Having your car inspected, if you experience any of the above signs, is good preventive maintenance and can help its parts wear less and last longer.
"If you think you may have a worn out or broken shock or strut, don't wait," said Rich White, executive director of the Car Care Council. "Whether you replace it yourself or take your car to a professional service technician, this situation should be taken care of right away."
The Car Care Council is the source of information for the "Be Car Care Aware" campaign, educating consumers about the benefits of regular vehicle care, maintenance and repair.
8 GM Brands: 1 or 2 Too Many?
Lots of folks are speculating about GM’s future. If you take all the press reports at heart, you would think that General Motors is on life support. Quite frankly, the opposite is true especially when you look at the global picture. In 2005, “the General” sold more than 9 million cars worldwide, the first time the automaker reached that figure since 1978. Yes, U.S. auto sales are down and some are calling for GM to reduce its many brands, currently numbering 8. Who should GM let go? Or, should General Motors stick with the game plan and maintain all 8 brands?
For the record, GM’s 8 brands are: Cadillac, Buick, Pontiac, Chevrolet, Saturn, GMC, Hummer, and Saab. You could take Saab out of that pack as the Swedish automaker (although fully owned by GM) builds few cars in North America. Still, GM includes Saab in its marketing schema so we’ll keep them in for argument’s sake.
Clearly, Cadillac is GM’s luxury division; Chevrolet is it’s budget or “All American” division; while GMC is the truck division. Beyond that, there is much muddling of divisions, but Buick is a maker of “near luxury” vehicles (Cadillac lite) while Hummer is GM’s specialty truck division. The Saab line is a bit confusing as it once was a true European division. Now, the make is chiefly featuring rebadged GM and Subaru vehicles with little original models to show for it. Finally, Pontiac and Saturn duplicate much of what the other divisions do, although the Saturn mystique of “no haggle pricing” gives the make a certain aura to it. That leaves Pontiac.
Pontiac, like the recently killed off Oldsmobile name, is probably one of the most vulnerable of the true “American” makes. Saturn will survive because its dealer network is tops and consumer satisfaction ranks up there with Lexus.
Ultimately, the Saab name will likely die first. Outside of the U.S., particularly in Europe, Opel is a known name and an important GM make. Word has it that some of Saab’s production will shift to Germany and certain rebadged Opels will begin to sport the Saab name. Let’s just say once that happens, there is little reason to continue making Saabs. Let the Saab name die with dignity. Why spoil it by selling rebadged Opels as Saabs?
Personally, I think GM should leave well enough alone with its remaining American brands. I wasn’t in favor of Oldsmobile’s demise and I am not in favor of killing off trusted brands. GM is retooling its operation as old models are killed off and as new or revived models step in. Look for the Chevy Camaro, Pontiac Firebird, Saturn Sky, and the Buick Enclave to help spark their respective divisions to renewed glory. Am I living a pipe dream? Maybe, but at least my imagination is going in a positive direction.
For the record, GM’s 8 brands are: Cadillac, Buick, Pontiac, Chevrolet, Saturn, GMC, Hummer, and Saab. You could take Saab out of that pack as the Swedish automaker (although fully owned by GM) builds few cars in North America. Still, GM includes Saab in its marketing schema so we’ll keep them in for argument’s sake.
Clearly, Cadillac is GM’s luxury division; Chevrolet is it’s budget or “All American” division; while GMC is the truck division. Beyond that, there is much muddling of divisions, but Buick is a maker of “near luxury” vehicles (Cadillac lite) while Hummer is GM’s specialty truck division. The Saab line is a bit confusing as it once was a true European division. Now, the make is chiefly featuring rebadged GM and Subaru vehicles with little original models to show for it. Finally, Pontiac and Saturn duplicate much of what the other divisions do, although the Saturn mystique of “no haggle pricing” gives the make a certain aura to it. That leaves Pontiac.
Pontiac, like the recently killed off Oldsmobile name, is probably one of the most vulnerable of the true “American” makes. Saturn will survive because its dealer network is tops and consumer satisfaction ranks up there with Lexus.
Ultimately, the Saab name will likely die first. Outside of the U.S., particularly in Europe, Opel is a known name and an important GM make. Word has it that some of Saab’s production will shift to Germany and certain rebadged Opels will begin to sport the Saab name. Let’s just say once that happens, there is little reason to continue making Saabs. Let the Saab name die with dignity. Why spoil it by selling rebadged Opels as Saabs?
Personally, I think GM should leave well enough alone with its remaining American brands. I wasn’t in favor of Oldsmobile’s demise and I am not in favor of killing off trusted brands. GM is retooling its operation as old models are killed off and as new or revived models step in. Look for the Chevy Camaro, Pontiac Firebird, Saturn Sky, and the Buick Enclave to help spark their respective divisions to renewed glory. Am I living a pipe dream? Maybe, but at least my imagination is going in a positive direction.
7 Tips To Help You Select Your Custom Car Cover
You lovingly wash and wax your vehicle on most sunny weekends, spending time detailing every single blotch, nick, scrape, or other damaging mark on your car's exterior. Part of the deal with owning any vehicle is making certain that it looks its best week in and week out. Still, you may not be doing all that you can to protect the finish. Other enemies including bird excrement, acid rain, and even harmful UV rays can thwart the best efforts of even the most diligent car owner. Fortunately, there is one automotive accessory that can help keep your car clean, provided you use it when your car is parked for an extended length of time. What am I talking about? Car covers! Read on for seven helpful tips to help you choose the right cover for your truck, van, SUV, or car.
When shopping for a custom car cover you must give consideration to what it does besides simply covering your car. Among some important points to know:
Will the car cover protect from damaging UV rays? If you live in an area of intense sunshine, such as Arizona, you need a car cover that offers the maximum protection from the sun.
Is the material durable? Does it breath? Will it tear if loaded down with snow or ice?
Will the car cover resist or completely repel rain?
Can the product survive weather extremes, i.e. intense heat or severe cold?
Will the car cover resist dust? Some car covers prevent even the finest dust from accumulating, dust that can mar your garaged car too.
Does the car cover come with multiple layers to protect from small insults? This is important feature to have if you leave your car in a public area. In addition, selecting a car cover that comes with side mirror pockets is a wise choice to ensure that your car receives the snuggest fit.
Finally, you will want to know if there is a lengthy guarantee offered, what colors are available, and what the return policies are, if any, of the cover that you select.
Most premium car covers allow you for them to be cleaned right in your washing machine. By selecting cold to warm water, regular bleach-free laundry detergent, and drying it on your dryer's permanent press cycle, you can make the dirtiest car cover clean in no time. Of course, make certain that you adhere to the manufacturer's specifications for the proper care of your car cover.
When shopping for a custom car cover you must give consideration to what it does besides simply covering your car. Among some important points to know:
Will the car cover protect from damaging UV rays? If you live in an area of intense sunshine, such as Arizona, you need a car cover that offers the maximum protection from the sun.
Is the material durable? Does it breath? Will it tear if loaded down with snow or ice?
Will the car cover resist or completely repel rain?
Can the product survive weather extremes, i.e. intense heat or severe cold?
Will the car cover resist dust? Some car covers prevent even the finest dust from accumulating, dust that can mar your garaged car too.
Does the car cover come with multiple layers to protect from small insults? This is important feature to have if you leave your car in a public area. In addition, selecting a car cover that comes with side mirror pockets is a wise choice to ensure that your car receives the snuggest fit.
Finally, you will want to know if there is a lengthy guarantee offered, what colors are available, and what the return policies are, if any, of the cover that you select.
Most premium car covers allow you for them to be cleaned right in your washing machine. By selecting cold to warm water, regular bleach-free laundry detergent, and drying it on your dryer's permanent press cycle, you can make the dirtiest car cover clean in no time. Of course, make certain that you adhere to the manufacturer's specifications for the proper care of your car cover.
Thursday, January 28, 2010
7 Reasons To Buy A Hybrid Car
You’re probably hearing a lot about hybrid cars these days. They are definitely being discussed everywhere. Hardly a day goes by that a major newspaper or television network isn’t doing a feature story on hybrids. And everyday it seems like one car manufacturer or another is introducing a new hybrid vehicle.
So what’s all the buzz about?
Well, hybrids are a new type of vehicle that runs on electricity (from a battery) and gasoline. Now, that’s a novel idea isn’t it?
Hybrids are picking up steam (sounds like a pun doesn’t it?) everywhere, including the world’s most a car lovin’ city – Los Angeles – where many of the top stars are hybrid owners.
In the “City of the Angels” you’ll see environmentally forward thinking celebrities, like Bill Maher, Alec Baldwin, Harrison Ford and “Seinfeld” co-creator and “Curb Your Enthusiasm” creator and star, Larry David behind the wheel of their hybrids.
You might also see the lovely Cameron Diaz cruisin’ the Hollywood Hills in her hybrid. And when Leonardo Di Caprio really wants to feel like “the king of the world,” guess what he’ll be driving? You did guess a hybrid, didn’t you?
What do the stars know that you don’t?
Well they know that driving a hybrid makes a lot of sense (and may save some cents too! :-) )
Want to know more about hybrids? Good. Now here are 7 reasons to buy a hybrid car.
1. The smaller hybrid compacts and sedans save considerable amounts of fuel compared to cars powered by gas turbine engines. If you’re interested in saving dollars on gas, this could be your solution.
2. The larger hybrid cars are not concerned with fuel efficiency. These cars are purchased because their owners want to boost power and performance. If you’re looking to get higher performance, consider a hybrid.
3. Hybrids can save you money in a multitude of ways. While the typical hybrid is about $3000 more than a typical car, this cost differential will narrow as auto manufacturers produce more hybrid cars in the future. The hybrid savings come in the form of state and federal incentives, reduced maintenance costs, and of course, lower fuel costs.
4. Your hybrid will even be financially advantageous to you when you decide it’s time to sell it. The resale value of hybrid cars is exceptional. Unlike most cars, hybrids hold their value at an astonishing level.
5. If you care about the planet and you’re concerned with the kind of environment you leave for future generations, driving a hybrid car is an important environmental statement. Hybrids generate less pollution than their standard counterparts.
6. Driving a hybrid saves gas. That’s a positive for our economy. The less we, as a society, spend on gas means we have more money to spend on other essentials and luxury products. We could even save the money we would have spent on gas and use it for our savings or investment plans.
7. Driving a hybrid could help America fight the war in Iraq. Here’s why. In addition to funding U.S. soldiers and the Iraqi efforts to create a democracy, many experts contend the U.S. is actually funding both sides of the Iraqi war. They believe Middle Eastern oil interests’ are using part of their profits to fund the insurgency. So, in effect, our excessive oil consumption makes it more difficult to bring peace to Iraq. Bottom line: the less we spend on gas and oil means less financial resources for our enemies overseas.
For all of these reasons, hybrid cars are “the next big thing in the automotive world.” So when it comes time for your next auto purchase, do yourself a favor and check out some hybrids cars. You might find that a hybrid is the perfect car for you.
So what’s all the buzz about?
Well, hybrids are a new type of vehicle that runs on electricity (from a battery) and gasoline. Now, that’s a novel idea isn’t it?
Hybrids are picking up steam (sounds like a pun doesn’t it?) everywhere, including the world’s most a car lovin’ city – Los Angeles – where many of the top stars are hybrid owners.
In the “City of the Angels” you’ll see environmentally forward thinking celebrities, like Bill Maher, Alec Baldwin, Harrison Ford and “Seinfeld” co-creator and “Curb Your Enthusiasm” creator and star, Larry David behind the wheel of their hybrids.
You might also see the lovely Cameron Diaz cruisin’ the Hollywood Hills in her hybrid. And when Leonardo Di Caprio really wants to feel like “the king of the world,” guess what he’ll be driving? You did guess a hybrid, didn’t you?
What do the stars know that you don’t?
Well they know that driving a hybrid makes a lot of sense (and may save some cents too! :-) )
Want to know more about hybrids? Good. Now here are 7 reasons to buy a hybrid car.
1. The smaller hybrid compacts and sedans save considerable amounts of fuel compared to cars powered by gas turbine engines. If you’re interested in saving dollars on gas, this could be your solution.
2. The larger hybrid cars are not concerned with fuel efficiency. These cars are purchased because their owners want to boost power and performance. If you’re looking to get higher performance, consider a hybrid.
3. Hybrids can save you money in a multitude of ways. While the typical hybrid is about $3000 more than a typical car, this cost differential will narrow as auto manufacturers produce more hybrid cars in the future. The hybrid savings come in the form of state and federal incentives, reduced maintenance costs, and of course, lower fuel costs.
4. Your hybrid will even be financially advantageous to you when you decide it’s time to sell it. The resale value of hybrid cars is exceptional. Unlike most cars, hybrids hold their value at an astonishing level.
5. If you care about the planet and you’re concerned with the kind of environment you leave for future generations, driving a hybrid car is an important environmental statement. Hybrids generate less pollution than their standard counterparts.
6. Driving a hybrid saves gas. That’s a positive for our economy. The less we, as a society, spend on gas means we have more money to spend on other essentials and luxury products. We could even save the money we would have spent on gas and use it for our savings or investment plans.
7. Driving a hybrid could help America fight the war in Iraq. Here’s why. In addition to funding U.S. soldiers and the Iraqi efforts to create a democracy, many experts contend the U.S. is actually funding both sides of the Iraqi war. They believe Middle Eastern oil interests’ are using part of their profits to fund the insurgency. So, in effect, our excessive oil consumption makes it more difficult to bring peace to Iraq. Bottom line: the less we spend on gas and oil means less financial resources for our enemies overseas.
For all of these reasons, hybrid cars are “the next big thing in the automotive world.” So when it comes time for your next auto purchase, do yourself a favor and check out some hybrids cars. You might find that a hybrid is the perfect car for you.
7 Guidelines For Used Car Prices
1. Know a little about pricing before you buy a used car. Franchise dealers that sell used cars add a certain percentage on the original value of the used car in the market. Markup is also added to the price of the used car at dealerships, which will make the price higher.
2. Determine the many factors that affect the used car prices. Used car pricings are affected by installed optional equipments or the location where you are buying the used car. There are areas that have a high market demand for a certain car. If that is the case, you may get a better deal if you travel outside of the zone to shop around for your car.
3. Find the used car's true market value at NADA. National Automobile Dealer's Association releases a copy of used car price guides every year. You may also check their web site to check the current prices of the used cars you are looking for.
4. Cheaper used cars may be found at government auctions. Government auctions happen every year and you may want to check out a checklist of the auction program. It may also offer you guidelines on finding quality used cars at lower prices. You may visit Federal Citizen Information to find out the guidelines in buying used cars from government auctions.
5. Check out the Internet. There are a lot of web sites that provide pricing guides on used cars and also guidelines in finding the right used car for you. You may compare prices; check out the features of the used car and the location where you can buy cheaper prices.
6. Determine if you have a fair deal with the price that is offered to you. Factors that affect used car prices include the age, market demand, overall condition, mileage, interior and exterior blemishes or if the car was maintained well.
7. Beware of trade tricks. Many dealers strategize on the behavior of consumers when buying used cars. Dealers know that buyers will not purchase a used car unless they feel that they are offered a price lower than the original price. Dealers tend to make the price higher than the actual amount and make the buyer believe that they are offering a discount. What the buyer does not know is that the discounted price is actually the original price of the car.
2. Determine the many factors that affect the used car prices. Used car pricings are affected by installed optional equipments or the location where you are buying the used car. There are areas that have a high market demand for a certain car. If that is the case, you may get a better deal if you travel outside of the zone to shop around for your car.
3. Find the used car's true market value at NADA. National Automobile Dealer's Association releases a copy of used car price guides every year. You may also check their web site to check the current prices of the used cars you are looking for.
4. Cheaper used cars may be found at government auctions. Government auctions happen every year and you may want to check out a checklist of the auction program. It may also offer you guidelines on finding quality used cars at lower prices. You may visit Federal Citizen Information to find out the guidelines in buying used cars from government auctions.
5. Check out the Internet. There are a lot of web sites that provide pricing guides on used cars and also guidelines in finding the right used car for you. You may compare prices; check out the features of the used car and the location where you can buy cheaper prices.
6. Determine if you have a fair deal with the price that is offered to you. Factors that affect used car prices include the age, market demand, overall condition, mileage, interior and exterior blemishes or if the car was maintained well.
7. Beware of trade tricks. Many dealers strategize on the behavior of consumers when buying used cars. Dealers know that buyers will not purchase a used car unless they feel that they are offered a price lower than the original price. Dealers tend to make the price higher than the actual amount and make the buyer believe that they are offering a discount. What the buyer does not know is that the discounted price is actually the original price of the car.
6 Pocket Rockets!
Just because your car is small, doesn’t mean that it has to be slow. In fact, some of the fastest cars on the road today are subcompacts. How so? Because their owners have modified them to the point where they can squeeze out additional horsepower and acceleration. Let’s take a look at six cars that qualify as genuine “pocket rockets.”
For the sake of argument, here are some ground rules for a pocket rocket:
The car must be a compact or smaller.
The engine must be normally aspirated; no turbo charged cars – four cylinders only.
New versions of the car must all retail for less than $20,000.
The following six cars all qualify as pocket rockets when each of the above stipulations has been met:
Dodge Neon; Ford Focus; Honda Civic; Scion tC; Subaru Impreza; and Volkswagen Golf.
Unfortunately, the Mitsubishi Eclipse retails for just above $20,000 so it does not qualify. Besides, it looks too much like a sports car; we are only examining those vehicles that are somewhat plain before being transformed by aftermarket parts.
Dodge Neon – Technically, the Neon is no longer in production as 2005 was its last model year. Still, with a 2.0L 132hp engine, the Neon remains an affordable favorite of the youth set who enjoy customizing their vehicles
Ford Focus – A lemon no more! Earlier models of the Focus were problem plagued, but the car has made significant strides in the past few years and has received Consumer Report’s recommended buy label too. The stubby ZX3 produces 136 horses with its 2.0L engine
Honda Civic – Redesigned for 2006, the Civic has been a fan favorite for over thirty years. Its teeny 1.8L engine pushes out an impressive 140 horses. The new Civic is a far cry from the “pregnant roller” skate look of the first Civics. Owners are grateful.
Scion tC- Unlike its two boxy brethren, the tC is sleek looking and has a rocket demeanor. With a 2.3L under its hood, the tC has the second largest engine of any car in this class. You net 160 horses with the Scion.
Subaru Impreza – The biggest car in this class has the most powerful engine, a 2.5L boxter engine producing 173 horses. Very competitive with larger and more powerful cars, but a favorite among “pocket rocket” fans nevertheless.
VW Golf – A 2.0L 115hp drives the Golf, but the car’s light weight allows for it to buzz down the highway at a fairly good clip.
Favorite ways of squeezing out additional power for pocket rocket owners include installing the following aftermarket parts:
Reusable air filters; top providers include: K&N and Green.
Cold air intake systems; favorites include: K&N, AEM, and Airaid.
Cat-back exhaust systems; leading manufacturers include: Magnaflow and Vibrant.
Performance chips; Hypertech and Jet Chips lead the way.
Performance level increases are measured in horsepower, thrust, and acceleration. Depending on the parts installed and model selected, improvements can range from slight to significant. Regardless, all six models have the potential of becoming true pocket rockets and that is part of the thrill in owning one.
For the sake of argument, here are some ground rules for a pocket rocket:
The following six cars all qualify as pocket rockets when each of the above stipulations has been met:
Dodge Neon; Ford Focus; Honda Civic; Scion tC; Subaru Impreza; and Volkswagen Golf.
Unfortunately, the Mitsubishi Eclipse retails for just above $20,000 so it does not qualify. Besides, it looks too much like a sports car; we are only examining those vehicles that are somewhat plain before being transformed by aftermarket parts.
Dodge Neon – Technically, the Neon is no longer in production as 2005 was its last model year. Still, with a 2.0L 132hp engine, the Neon remains an affordable favorite of the youth set who enjoy customizing their vehicles
Ford Focus – A lemon no more! Earlier models of the Focus were problem plagued, but the car has made significant strides in the past few years and has received Consumer Report’s recommended buy label too. The stubby ZX3 produces 136 horses with its 2.0L engine
Honda Civic – Redesigned for 2006, the Civic has been a fan favorite for over thirty years. Its teeny 1.8L engine pushes out an impressive 140 horses. The new Civic is a far cry from the “pregnant roller” skate look of the first Civics. Owners are grateful.
Scion tC- Unlike its two boxy brethren, the tC is sleek looking and has a rocket demeanor. With a 2.3L under its hood, the tC has the second largest engine of any car in this class. You net 160 horses with the Scion.
Subaru Impreza – The biggest car in this class has the most powerful engine, a 2.5L boxter engine producing 173 horses. Very competitive with larger and more powerful cars, but a favorite among “pocket rocket” fans nevertheless.
VW Golf – A 2.0L 115hp drives the Golf, but the car’s light weight allows for it to buzz down the highway at a fairly good clip.
Favorite ways of squeezing out additional power for pocket rocket owners include installing the following aftermarket parts:
Performance level increases are measured in horsepower, thrust, and acceleration. Depending on the parts installed and model selected, improvements can range from slight to significant. Regardless, all six models have the potential of becoming true pocket rockets and that is part of the thrill in owning one.
6 Must Have Auto Accessories
Buying a new car is an experience that few will ever forget: the smell, the pristine interior, and the flawless ride are some of the things enjoyed by new car owners. Yet, despite how well equipped even the most expensive cars can be, oftentimes they leave the showroom with several accessories missing. No, they weren’t stolen; instead, for some queer reason these “must have” accessories were not included with the sale. Let’s take a look at six accessories every vehicle should have.
Floor mats – You have got to be kidding…no floor mats?! Oddly, floor mats are the chief accessory typically not included with any sale. Instead, you get a throwaway paper sheet for the driver. Without floor mats in place you can bet that the interior will be soiled in short order. Worse, if you wait too long your carpeting could be damaged which is especially bad news for you if you lease your vehicle. Just wait ‘til you see the price of replacing damaged automotive carpeting!
Cargo liners – Like the interior, the car’s trunk area is subject to dirt, debris, mud, the elements, and more. Some automakers have wised up over the years and included cargo liners as standard equipment while others make a cargo liner an expensive add-on, after-the-sale accessory for buyers.
Bug shields – If you live in a humid climate, a bug shield is a must. No automaker offers one as standard equipment; if you want to protect your hood and windshield a bug shield is a must. Also marketed as bug deflectors.
Car bra – Sure, they are stylish, but a car bra is much more than that. Offering protection to your grille and to the front part of your hood, a car bra can help deflect debris kicked up from the road. Who hasn’t come across that sort of problem while traversing our interstates?
Brake dust shields – No, there isn’t a safety aspect with a dust shield, but there certainly are aesthetic reasons why they make sense. You spent a lot for your tires and wheels, so why go through the hassle of a weekly cleaning just to keep your car looking great? Dust shields limit the dust so that you can do what you really want to do: drive.
Car cover – Whether you keep your car garaged or whether you leave it outside, a car cover is essential toward protecting your vehicle’s finish. Indoor air pollution and dust can damage a garaged vehicle; solar rays, moisture, bird poop, wind, and small impacts can damage exposed vehicles. For less than $200 you can buy a four layer, breathable car cover that will offer the protection your car so desperately needs.
So, there you have it. Six essential auto accessories for every vehicle. You’ll pay a mint for each accessory if you let your dealer add them in after the sale, so why not shop online with Car Stuff to find everything you need for your car and for less?
Floor mats – You have got to be kidding…no floor mats?! Oddly, floor mats are the chief accessory typically not included with any sale. Instead, you get a throwaway paper sheet for the driver. Without floor mats in place you can bet that the interior will be soiled in short order. Worse, if you wait too long your carpeting could be damaged which is especially bad news for you if you lease your vehicle. Just wait ‘til you see the price of replacing damaged automotive carpeting!
Cargo liners – Like the interior, the car’s trunk area is subject to dirt, debris, mud, the elements, and more. Some automakers have wised up over the years and included cargo liners as standard equipment while others make a cargo liner an expensive add-on, after-the-sale accessory for buyers.
Bug shields – If you live in a humid climate, a bug shield is a must. No automaker offers one as standard equipment; if you want to protect your hood and windshield a bug shield is a must. Also marketed as bug deflectors.
Car bra – Sure, they are stylish, but a car bra is much more than that. Offering protection to your grille and to the front part of your hood, a car bra can help deflect debris kicked up from the road. Who hasn’t come across that sort of problem while traversing our interstates?
Brake dust shields – No, there isn’t a safety aspect with a dust shield, but there certainly are aesthetic reasons why they make sense. You spent a lot for your tires and wheels, so why go through the hassle of a weekly cleaning just to keep your car looking great? Dust shields limit the dust so that you can do what you really want to do: drive.
Car cover – Whether you keep your car garaged or whether you leave it outside, a car cover is essential toward protecting your vehicle’s finish. Indoor air pollution and dust can damage a garaged vehicle; solar rays, moisture, bird poop, wind, and small impacts can damage exposed vehicles. For less than $200 you can buy a four layer, breathable car cover that will offer the protection your car so desperately needs.
So, there you have it. Six essential auto accessories for every vehicle. You’ll pay a mint for each accessory if you let your dealer add them in after the sale, so why not shop online with Car Stuff to find everything you need for your car and for less?
Wednesday, January 27, 2010
5 Tips for a Clean Garage Workshop
You park your car in the driveway and you still have to work on your projects in the back yard. If you don't use your garage for its designed purpose, why not turn it into a tidy workshop? Here are five steps to turn your garage in a perfect small home workshop:
1) Create your own workbench from an old door, some sawhorses or scrap wood.
2) Mount a pegboard on the wall to store your tools. It would be a great idea to mount it above your workbench. Strategically place pegs according to the type of tools you will be placing on the board. After hanging your tools, trace around them with a marker so you will know where each one goes.
3) Use old jars for holding nails, nuts, bolts and screws.
4) Make a storage box for the rags because they tend to accumulate in the working area.
5) Use a small tackle box for transporting items such as screws and nails as you move around the shop.
1) Create your own workbench from an old door, some sawhorses or scrap wood.
2) Mount a pegboard on the wall to store your tools. It would be a great idea to mount it above your workbench. Strategically place pegs according to the type of tools you will be placing on the board. After hanging your tools, trace around them with a marker so you will know where each one goes.
3) Use old jars for holding nails, nuts, bolts and screws.
4) Make a storage box for the rags because they tend to accumulate in the working area.
5) Use a small tackle box for transporting items such as screws and nails as you move around the shop.
5 Benefits Of Car Covers – How Can They Protect Your Investment?
Why Buy A Custom-Fit Car Cover? To help protect your investment and keep your vehicle looking show-room new. Keeping your vehicle covered with a car cover can:
• Prevent unsightly dents, dings and scratches
• Shield it against finish-destroying man-made and natural hazards
• Act as an excellent theft deterrent
• Put a barrier between your paint and damaging weather
• For the fifth car cover benefit visit AutoAnything.com for more details
Dents, Dings and Scratches Reference
There's a certain feeling you experience when you discover that first dent, ding or scratch on your new vehicle. Unfortunately, they're a fact of life and nothing short of covering your vehicle with reactive tank armor will truly prevent them. However, using a car cover adds a layer of protective padding to cushion against runaway shopping carts, absent-minded car doors or other blows.
Natural Hazards Guide
Birds, trees, dust. They certainly seem harmless enough, but without a car cover, they can inflict serious damage to your prized vehicle.
Our fine feathered friends seem to have impeccable aim when it comes to leaving their droppings on our vehicles. Outdoor car covers catch bird bombs before they splatter against your paintjob. Plus, the majority of outdoor car cover fabrics are not harmed by the droppings acidity outdoor car cover fabrics.
The shady spot under a tree may look like a welcome spot to park your vehicle. However, with nuts, berries, sap, pollen, not to mention the roosting birds, parking under a tree can wreak havoc on your vehicle. A car cover can help keep your vehicle cool, even in the sun. Or, if you do park under a tree, a car cover can safeguard your vehicle from the onslaught.
Your vehicle's paint is only about 0.006 inches thick. Whether indoors or out, when dust sits on your paint it turns abrasive and causes minute scratches. By the time you notice them, it's already too late. Both indoor car cover fabrics and outdoor car cover fabrics are designed to keep dust away from the surface of your vehicle.
Theft Deterrent Reference
Though it may only look like a thin layer of fabric, a Covercraft car cover can do an amazing job at keeping thieves away from your vehicle. Since time is crucial in not getting caught, thieves often pass by covered vehicles, which take longer to get into, and go after easier prey. And, if you add a lock and cable to your car cover, you will not only keep your cover secure, but your vehicle becomes even harder to steal.
Damaging Weather Guide
You don't have to be a meteorologist to know that harsh weather can do a number on your vehicle's finish. An occasional spring shower poses no real threat to your vehicle. However, seemingly harmless rain can find its way into tiny scratches or blemishes and start the corrosion process. And, acid rain - well, the name says it all. A water-resistant car cover will keep your vehicle high and dry.
Harsh UV (ultraviolet) rays and the intense radiant heat of the Sun can cook the color right out of your paint. A car cover is like sunscreen for your vehicle, blocking harmful UV light and preventing photo degradation. And, a lighter colored car cover will yield a reflective cooling effect.
It's not the cold that gets to your vehicle's finish - it's the moisture and salt. These two corrosive cohorts are in cahoots to ravage your paint. Fortunately, a car cover can keep both these culprits away from your vehicle.
The fundamental advantages of custom-fit car covers
A custom-fit car cover is specially tailored to the lines of your vehicle. No detail is left unturned. Custom-fit car covers hug every contour of your vehicle and feature sewn-in mirror pockets, plus grommet holes for antennas.
On the other hand, low-quality universal-fit car covers are baggy and can slip, slide and rub against your paint, destroying your finish. Additionally, the poor fit allows the harsh elements to creep in at every gap and defeat the purpose of the cover.
The specialized cut of a custom-fit car cover is far and away the best choice to wrap up and protect your vehicle.
When deciding which car cover is right for your vehicle, we advise that you consider:
• Where you park and how often you use your vehicle
• The weather in your area
• What color is right for your vehicle and storage needs
Where You Park and How Often You Use Your vehicle:
• When you park outside and cover up every day, you may want to choose a lightweight outdoor car cover that's simple to use and easy to fold.
• For those who park in crowded lots or on streets with children at play and heavy pedestrian traffic, a thicker heavyweight outdoor car cover that provides some dent and ding protection is best.
• If you garage your vehicle and frequently cover and uncover it, a lightweight indoor car cover is ideal.
• Choose a heavier indoor car cover to keep your classic safe for long-term storage.
• A super-soft indoor car cover lets you pamper your "baby" and keep it safe and secure.
The Weather in Your Area
The ideal car cover for your vehicle is greatly influenced by your local weather. Many materials have been developed to deal with specific inclement weather conditions. Rainy parts of the country like the Pacific Northwest and Deep South would demand an outdoor car cover with exceptional water resistance. The coastal areas along the Atlantic, Pacific and Gulf of Mexico need a car cover that will protect from and last in salty air. In the sunniest zones of the country like the desert Southwest, a Coverking car cover with extra UV and photo degradation protection and reflective properties makes the most sense.
Tips on What Color is Right for Your vehicle and Storage Needs
Car covers are offered in an array of colors, but picking the right hue isn't solely a matter of personal taste. Here are a few tips and points of reference to help you with your choice:
• If you live in a sunnier climate, you'll want a lighter colored fabric for outdoor storage.
• If you have a lighter colored vehicle, a lighter colored fabric is safer for your paint. Bright colors, although thoroughly, tested could bleed under certain conditions.
• If you're looking for style, a vibrant color can lend your vehicle character or compliment its finish.
• Prevent unsightly dents, dings and scratches
• Shield it against finish-destroying man-made and natural hazards
• Act as an excellent theft deterrent
• Put a barrier between your paint and damaging weather
• For the fifth car cover benefit visit AutoAnything.com for more details
Dents, Dings and Scratches Reference
There's a certain feeling you experience when you discover that first dent, ding or scratch on your new vehicle. Unfortunately, they're a fact of life and nothing short of covering your vehicle with reactive tank armor will truly prevent them. However, using a car cover adds a layer of protective padding to cushion against runaway shopping carts, absent-minded car doors or other blows.
Natural Hazards Guide
Birds, trees, dust. They certainly seem harmless enough, but without a car cover, they can inflict serious damage to your prized vehicle.
Our fine feathered friends seem to have impeccable aim when it comes to leaving their droppings on our vehicles. Outdoor car covers catch bird bombs before they splatter against your paintjob. Plus, the majority of outdoor car cover fabrics are not harmed by the droppings acidity outdoor car cover fabrics.
The shady spot under a tree may look like a welcome spot to park your vehicle. However, with nuts, berries, sap, pollen, not to mention the roosting birds, parking under a tree can wreak havoc on your vehicle. A car cover can help keep your vehicle cool, even in the sun. Or, if you do park under a tree, a car cover can safeguard your vehicle from the onslaught.
Your vehicle's paint is only about 0.006 inches thick. Whether indoors or out, when dust sits on your paint it turns abrasive and causes minute scratches. By the time you notice them, it's already too late. Both indoor car cover fabrics and outdoor car cover fabrics are designed to keep dust away from the surface of your vehicle.
Theft Deterrent Reference
Though it may only look like a thin layer of fabric, a Covercraft car cover can do an amazing job at keeping thieves away from your vehicle. Since time is crucial in not getting caught, thieves often pass by covered vehicles, which take longer to get into, and go after easier prey. And, if you add a lock and cable to your car cover, you will not only keep your cover secure, but your vehicle becomes even harder to steal.
Damaging Weather Guide
You don't have to be a meteorologist to know that harsh weather can do a number on your vehicle's finish. An occasional spring shower poses no real threat to your vehicle. However, seemingly harmless rain can find its way into tiny scratches or blemishes and start the corrosion process. And, acid rain - well, the name says it all. A water-resistant car cover will keep your vehicle high and dry.
Harsh UV (ultraviolet) rays and the intense radiant heat of the Sun can cook the color right out of your paint. A car cover is like sunscreen for your vehicle, blocking harmful UV light and preventing photo degradation. And, a lighter colored car cover will yield a reflective cooling effect.
It's not the cold that gets to your vehicle's finish - it's the moisture and salt. These two corrosive cohorts are in cahoots to ravage your paint. Fortunately, a car cover can keep both these culprits away from your vehicle.
The fundamental advantages of custom-fit car covers
A custom-fit car cover is specially tailored to the lines of your vehicle. No detail is left unturned. Custom-fit car covers hug every contour of your vehicle and feature sewn-in mirror pockets, plus grommet holes for antennas.
On the other hand, low-quality universal-fit car covers are baggy and can slip, slide and rub against your paint, destroying your finish. Additionally, the poor fit allows the harsh elements to creep in at every gap and defeat the purpose of the cover.
The specialized cut of a custom-fit car cover is far and away the best choice to wrap up and protect your vehicle.
When deciding which car cover is right for your vehicle, we advise that you consider:
• Where you park and how often you use your vehicle
• The weather in your area
• What color is right for your vehicle and storage needs
Where You Park and How Often You Use Your vehicle:
• When you park outside and cover up every day, you may want to choose a lightweight outdoor car cover that's simple to use and easy to fold.
• For those who park in crowded lots or on streets with children at play and heavy pedestrian traffic, a thicker heavyweight outdoor car cover that provides some dent and ding protection is best.
• If you garage your vehicle and frequently cover and uncover it, a lightweight indoor car cover is ideal.
• Choose a heavier indoor car cover to keep your classic safe for long-term storage.
• A super-soft indoor car cover lets you pamper your "baby" and keep it safe and secure.
The Weather in Your Area
The ideal car cover for your vehicle is greatly influenced by your local weather. Many materials have been developed to deal with specific inclement weather conditions. Rainy parts of the country like the Pacific Northwest and Deep South would demand an outdoor car cover with exceptional water resistance. The coastal areas along the Atlantic, Pacific and Gulf of Mexico need a car cover that will protect from and last in salty air. In the sunniest zones of the country like the desert Southwest, a Coverking car cover with extra UV and photo degradation protection and reflective properties makes the most sense.
Tips on What Color is Right for Your vehicle and Storage Needs
Car covers are offered in an array of colors, but picking the right hue isn't solely a matter of personal taste. Here are a few tips and points of reference to help you with your choice:
• If you live in a sunnier climate, you'll want a lighter colored fabric for outdoor storage.
• If you have a lighter colored vehicle, a lighter colored fabric is safer for your paint. Bright colors, although thoroughly, tested could bleed under certain conditions.
• If you're looking for style, a vibrant color can lend your vehicle character or compliment its finish.
4 Ways To Increase Automotive Performance
In these days of high gasoline prices, it may seem ridiculous to consider ways to increase your car's performance as they are almost always associated with increased fuel consumption. However, there are four ways to increase performance that do not have to negatively impact your gas mileage. Let's take a closer look at each one.
1. Reusable Air Filters. Landfills are stuffed with items we use once and then throw out. Auto air filters are one such item and through the life of a car you can go through 6-12 of them with no problem. For approximately three times the price, washable and reusable air filters are a great alternative. When you purchase one it likely will be the last air filter your car will ever need. Reusable air filters enable you to gain slight increases in horsepower and acceleration as well as to impact the environment in a positive way.
2. Performance Chips. All new cars are operated by a computer chip that tells how much torque and horsepower can be displaced. Performance chips or recalibrations of your current chip can produce significant increases in horsepower and torque for your vehicle.
3. Performance Exhaust Systems. Cat-back or "catalyst-back exhaust systems" are a great way to free up trapped torque and to unleash horsepower. Keeping all the important emissions parts in place, a cat-back system incorporates large width exhaust pipes and low restriction performance mufflers into your car thereby lowering exhaust back pressure. A side benefit is the really awesome sound emitting from the exhaust system.
4. Cold Air Intake. A cold air intake is an under the hood mod that helps to reduce the temperature of the air entering the car for the sole purpose of increasing the power of the engine. Side benefits include enhancements to the appearance of the engine bay as this part can be attractive and colorful; the sound the unit makes is also appealing.
Costs for each of these performance enhancements can vary greatly. Shopping online with a trusted wholesaler is one of the best ways to find top quality parts at the lowest possible prices. By doing the work yourself, you can save a bundle and enjoy the fruits of your labor in no time.
1. Reusable Air Filters. Landfills are stuffed with items we use once and then throw out. Auto air filters are one such item and through the life of a car you can go through 6-12 of them with no problem. For approximately three times the price, washable and reusable air filters are a great alternative. When you purchase one it likely will be the last air filter your car will ever need. Reusable air filters enable you to gain slight increases in horsepower and acceleration as well as to impact the environment in a positive way.
2. Performance Chips. All new cars are operated by a computer chip that tells how much torque and horsepower can be displaced. Performance chips or recalibrations of your current chip can produce significant increases in horsepower and torque for your vehicle.
3. Performance Exhaust Systems. Cat-back or "catalyst-back exhaust systems" are a great way to free up trapped torque and to unleash horsepower. Keeping all the important emissions parts in place, a cat-back system incorporates large width exhaust pipes and low restriction performance mufflers into your car thereby lowering exhaust back pressure. A side benefit is the really awesome sound emitting from the exhaust system.
4. Cold Air Intake. A cold air intake is an under the hood mod that helps to reduce the temperature of the air entering the car for the sole purpose of increasing the power of the engine. Side benefits include enhancements to the appearance of the engine bay as this part can be attractive and colorful; the sound the unit makes is also appealing.
Costs for each of these performance enhancements can vary greatly. Shopping online with a trusted wholesaler is one of the best ways to find top quality parts at the lowest possible prices. By doing the work yourself, you can save a bundle and enjoy the fruits of your labor in no time.
3M Clear Bra - What an invention!
The 3m clear bra is a wonderful invention for any car-lover who treats his prized possession like a true friend. A man’s best friend is not always the family dog. Sometimes a car can take the place of a great pet and nothing hurts more than seeing that first scratch or dent on your favorite automobile.
However, traditional protective bras are not the most attractive option for car owners who want to protect their investments.
The problem with the traditional protective covering is simply due to the fact that it covers the magnificent machine. No real car enthusiast wants to hide his prized automobile under a rubbery surface. He doesn’t want to spend a lot of money on the perfect finish to cover it up with a protective layer. Unfortunately, many car owners had to choose between chips and scrapes or hiding the finish.
Not anymore. A car enthusiast can opt for a 3m clear bra that protects the car by creating a colorless barrier between the car’s finish and the elements. The 3m clear bra is simply a protective film that is literally painted over the car’s exterior. This product is commonly used on trucks, cars and vans of vehicle owners who cringe at the thought of a pebble getting near their priceless object.
The 3m clear bra is also used to protect headlights as well. The protective layer is commonly applied to the front of the vehicle and on the lenses of the headlights. The beauty of this material is that it is virtually undetectable. The original design of the vehicle is not changed in any way. The owner has the peace of mind that comes with knowing that the car is protected while having the luxury of enjoying his vehicle in its original state.
Some may wonder if the product is really as effective as the traditional protective cover. The 3m clear bra will protect the vehicle from chipping. The material was originally designed to be used on aircraft propellers to protect them from chipping. Surely the material will be effective at preventing chipping on vehicles as well.
Another concern is the quality of the clarity of the 3m clear bra. How clear is it, really? The manufacturer of the product boasts that the material is virtually undetectable unless the vehicle is very white in color. The clear coat is slightly visible on a stark white car when very close but it is not detectable from a distance. You will see a faint line where the 3m clear bra stops but that is better than an ugly bug shield or paint chips.
However, traditional protective bras are not the most attractive option for car owners who want to protect their investments.
The problem with the traditional protective covering is simply due to the fact that it covers the magnificent machine. No real car enthusiast wants to hide his prized automobile under a rubbery surface. He doesn’t want to spend a lot of money on the perfect finish to cover it up with a protective layer. Unfortunately, many car owners had to choose between chips and scrapes or hiding the finish.
Not anymore. A car enthusiast can opt for a 3m clear bra that protects the car by creating a colorless barrier between the car’s finish and the elements. The 3m clear bra is simply a protective film that is literally painted over the car’s exterior. This product is commonly used on trucks, cars and vans of vehicle owners who cringe at the thought of a pebble getting near their priceless object.
The 3m clear bra is also used to protect headlights as well. The protective layer is commonly applied to the front of the vehicle and on the lenses of the headlights. The beauty of this material is that it is virtually undetectable. The original design of the vehicle is not changed in any way. The owner has the peace of mind that comes with knowing that the car is protected while having the luxury of enjoying his vehicle in its original state.
Some may wonder if the product is really as effective as the traditional protective cover. The 3m clear bra will protect the vehicle from chipping. The material was originally designed to be used on aircraft propellers to protect them from chipping. Surely the material will be effective at preventing chipping on vehicles as well.
Another concern is the quality of the clarity of the 3m clear bra. How clear is it, really? The manufacturer of the product boasts that the material is virtually undetectable unless the vehicle is very white in color. The clear coat is slightly visible on a stark white car when very close but it is not detectable from a distance. You will see a faint line where the 3m clear bra stops but that is better than an ugly bug shield or paint chips.
Tuesday, January 26, 2010
3 American Performance Cars
Bear with me as I step back in time to formulate what I believe are three terrific American built performance cars: the Ford Mustang, the Dodge Challenger, and the Chevrolet Camaro. Currently, only the Mustang is in production with the Challenger coming back by 2009. GM hasn’t committed to building the Camaro just yet, but the company is likely to make a decision in favor of the car and its sibling, the Pontiac Firebird, by this summer. So, what is it about American performance cars that set them apart from the rest? In one word: muscle. Read on as I compare and contrast these three vehicles and share with you my feeble attempts to explain the culture behind the cars.
So, you think I forgot the Chevy Corvette and Dodge Viper when talking about performance cars? No, I did not. Both models are performance cars as well as race cars. On the other hand the Mustang, Challenger, and Camaro are mass produced performance cars with muscle. There is a difference in the way a typical race car handles, rides, and performs vs. a muscle car.
Typically, a muscle car was a coupe version of some of the larger cars that were pervasive on U.S. highways in the 1960s and 1970s. The Mustang and Camaro, however, were designed separately [although they both heavily borrowed parts from other models] and these “pony” cars were a category all to themselves. For comparison’s sake, they join the Dodge Challenger, a performance version of Mopar cars of its time. All three were compared by critics of that time and all three will once again be compared in a few years when production has been ramped up.
Ford Mustang -– Step back in time with me to April 1964 to an era when America was heavily involved in the space race, Lyndon Johnson was president, and General Motors ruled autodom. Ford, for its part, had been nipping at GM’s heels for years, but the failed Edsels of the late 1950s had cost the company dearly. Still, it was the time of the New York World’s Fair and Ford used the fair and television technology to promote its newest offering, the Mustang. A 2+2 coupe borrowing parts from the Fairlane and Falcon, the 1964 ½ model was the first one sold and is widely credited with being the best introduction of a new vehicle ever. With a V6 engine standard and V8 optional, the all new Mustang quickly broke sales records and has been a hot seller ever since. Indeed, with the introduction of the “retro” look Mustang in 2005, the car once again has spawned interest in the muscle car segment as both DaimlerChrysler and General Motors craft competing models of their own.
Dodge Challenger -– After the success of earlier muscle cars including the Dodge Charger and Plymouth ‘Cuda, the Dodge Challenger was launched as a 1970 model. The car borrowed heavily from the ‘Cuda although the sheet metal was somewhat different and the wheelbase was stretched by a couple of inches. Because the muscle car era was in decline at the time of its introduction, the Challenger lasted only five model years before it was cancelled. The concept Challenger currently on display at many auto shows is based on the 1970 design and is the talk of message boards and blogs across the nation. Look for Hemi powered engines as being favored by many owners; the car is likely to share some technology with the current Magnum wagon and Charger sedan.
Chevrolet Camaro -- GM was asleep at the wheel when the Mustang came out. It took nearly three years before the company could respond and when it did the Camaro and Pontiac Firebird were the result. Although both cars sold well over the years, neither one could match the Mustang’s sales levels and by the time the last cars were sold in 2002, production dropped to a trickle. Still, the end of the Camaro after 35 years has stirred renewed interest in the name and thanks to the retro Mustang, the entire muscle car category is growing once again. Look for a 2010 Camaro to be the first Camaro since 2002; a ragtop version is also being considered.
So, just who can be expected to purchase a muscle car these days? People just like me: middle aged men who grew up with the original models. In addition, a whole new generation of younger drivers tired of the “me too” look of so many of the compact cars out there. Muscle cars of today are so much different from earlier era cars as they incorporate the look of the originals while harnessing today’s technology. Thus, fuel savings will be decent without sacrificing performance: a true win-win situation.
No, I cannot wait to see a Mustang, Challenger, and Camaro lined up at a traffic light waiting for the light to turn green. A new muscle car era is upon us and for that I am very excited.
So, you think I forgot the Chevy Corvette and Dodge Viper when talking about performance cars? No, I did not. Both models are performance cars as well as race cars. On the other hand the Mustang, Challenger, and Camaro are mass produced performance cars with muscle. There is a difference in the way a typical race car handles, rides, and performs vs. a muscle car.
Typically, a muscle car was a coupe version of some of the larger cars that were pervasive on U.S. highways in the 1960s and 1970s. The Mustang and Camaro, however, were designed separately [although they both heavily borrowed parts from other models] and these “pony” cars were a category all to themselves. For comparison’s sake, they join the Dodge Challenger, a performance version of Mopar cars of its time. All three were compared by critics of that time and all three will once again be compared in a few years when production has been ramped up.
Ford Mustang -– Step back in time with me to April 1964 to an era when America was heavily involved in the space race, Lyndon Johnson was president, and General Motors ruled autodom. Ford, for its part, had been nipping at GM’s heels for years, but the failed Edsels of the late 1950s had cost the company dearly. Still, it was the time of the New York World’s Fair and Ford used the fair and television technology to promote its newest offering, the Mustang. A 2+2 coupe borrowing parts from the Fairlane and Falcon, the 1964 ½ model was the first one sold and is widely credited with being the best introduction of a new vehicle ever. With a V6 engine standard and V8 optional, the all new Mustang quickly broke sales records and has been a hot seller ever since. Indeed, with the introduction of the “retro” look Mustang in 2005, the car once again has spawned interest in the muscle car segment as both DaimlerChrysler and General Motors craft competing models of their own.
Dodge Challenger -– After the success of earlier muscle cars including the Dodge Charger and Plymouth ‘Cuda, the Dodge Challenger was launched as a 1970 model. The car borrowed heavily from the ‘Cuda although the sheet metal was somewhat different and the wheelbase was stretched by a couple of inches. Because the muscle car era was in decline at the time of its introduction, the Challenger lasted only five model years before it was cancelled. The concept Challenger currently on display at many auto shows is based on the 1970 design and is the talk of message boards and blogs across the nation. Look for Hemi powered engines as being favored by many owners; the car is likely to share some technology with the current Magnum wagon and Charger sedan.
Chevrolet Camaro -- GM was asleep at the wheel when the Mustang came out. It took nearly three years before the company could respond and when it did the Camaro and Pontiac Firebird were the result. Although both cars sold well over the years, neither one could match the Mustang’s sales levels and by the time the last cars were sold in 2002, production dropped to a trickle. Still, the end of the Camaro after 35 years has stirred renewed interest in the name and thanks to the retro Mustang, the entire muscle car category is growing once again. Look for a 2010 Camaro to be the first Camaro since 2002; a ragtop version is also being considered.
So, just who can be expected to purchase a muscle car these days? People just like me: middle aged men who grew up with the original models. In addition, a whole new generation of younger drivers tired of the “me too” look of so many of the compact cars out there. Muscle cars of today are so much different from earlier era cars as they incorporate the look of the originals while harnessing today’s technology. Thus, fuel savings will be decent without sacrificing performance: a true win-win situation.
No, I cannot wait to see a Mustang, Challenger, and Camaro lined up at a traffic light waiting for the light to turn green. A new muscle car era is upon us and for that I am very excited.
3 Advantages Of Hybrid Cars Over Conventional Cars
Due to the rising cost of fuel and the environmental damage it causes to our planet, many car owners or buyers are looking for an alternative way to save money. Let's face it, fuel supply is finite and the prices of gas is only going to rise higher and higher. That is where a hybrid car has its advantages
Hybrid cars have been gaining in popularity in recent years. With lower cost of production and new hybrid car technology being developed, owning a hybrid car is becoming affordable to everyone.
Hybrid Cars Saves Gas
The obvious advantage of using hybrid cars is that it saves gas. Combining the cleaner energy of an electric motor with the long range capacity of a gasoline engine allows a hybrid car to save as much as 30 miles a gallon. One feature of hybrid cars is that the gasoline engine is shut off automatically when the car stops. This also helps in saving fuel. That is also the reason why hybrid cars are so quiet why it is stationary. The gasoline engine is automatically turned on when you step on the accelerator pedal.
Hybrid Cars Are Environment Friendly
Hybrid cars emit lower toxic emissions compared to conventional gasoline-powered cars due to less gasoline being burned. It is environmentally friendly, causes less pollution and releases less carbon dioxide into the atmosphere. If you do not know, carbon dioxide is one of the primary reasons for rising global warming. For example, the Toyota Prius can reduce tailpipe emissions by up to ninety percent and the greenhouse gas emissions by as much as fifty percent.
Tax Incentives For Hybrid Cars
Due to world political pressures around the world to reduce greenhouse emissions, President Bush signed an agreement in 2005 to provide huge tax relief to hybrid car buyers. The tax incentive varies by model and are based on two factors
1. How fuel efficient the hybrid car is compared to a conventional car in 2002 with the same weight class.
2. How much gasoline the hybrid car can save in its lifetime compared with an equivalent conventional car
For example, a Honda Accord hybrid car have reduced tax credits of $600 while a Toyota Prius has a tax credit of $3150. Do note that the tax credits do expire after 2010 for most hybrid cars.
Hybrid car manufacturers are continually researching for more ways to reduce fuel consumption and better fuel efficiency. Also as more hybrid cars are being adopted, the cost of hybrid cars will reduce making it more affordable for everyone.
Hybrid cars have been gaining in popularity in recent years. With lower cost of production and new hybrid car technology being developed, owning a hybrid car is becoming affordable to everyone.
Hybrid Cars Saves Gas
The obvious advantage of using hybrid cars is that it saves gas. Combining the cleaner energy of an electric motor with the long range capacity of a gasoline engine allows a hybrid car to save as much as 30 miles a gallon. One feature of hybrid cars is that the gasoline engine is shut off automatically when the car stops. This also helps in saving fuel. That is also the reason why hybrid cars are so quiet why it is stationary. The gasoline engine is automatically turned on when you step on the accelerator pedal.
Hybrid Cars Are Environment Friendly
Hybrid cars emit lower toxic emissions compared to conventional gasoline-powered cars due to less gasoline being burned. It is environmentally friendly, causes less pollution and releases less carbon dioxide into the atmosphere. If you do not know, carbon dioxide is one of the primary reasons for rising global warming. For example, the Toyota Prius can reduce tailpipe emissions by up to ninety percent and the greenhouse gas emissions by as much as fifty percent.
Tax Incentives For Hybrid Cars
Due to world political pressures around the world to reduce greenhouse emissions, President Bush signed an agreement in 2005 to provide huge tax relief to hybrid car buyers. The tax incentive varies by model and are based on two factors
1. How fuel efficient the hybrid car is compared to a conventional car in 2002 with the same weight class.
2. How much gasoline the hybrid car can save in its lifetime compared with an equivalent conventional car
For example, a Honda Accord hybrid car have reduced tax credits of $600 while a Toyota Prius has a tax credit of $3150. Do note that the tax credits do expire after 2010 for most hybrid cars.
Hybrid car manufacturers are continually researching for more ways to reduce fuel consumption and better fuel efficiency. Also as more hybrid cars are being adopted, the cost of hybrid cars will reduce making it more affordable for everyone.
‘Tune yourself’ with the best performance software
Are you one of those passionate drivers, looking to extract maximum power from their engines without having to sacrifice the simplicity, safety and comfort that come with owning a European car? You now have but one choice – getting a big turbo software!
There are many available now on the market! The unitronic turbo software comes in a number of hardware configurations for most Volkswagen, Audi, Porsche and Volvo applications. There are also programs for all setups: from street/track monsters to quarter mile beasts. For certain setups that are not yet available, you can choose the dyno tuned custom software, tailored to your needs. There are many factors that determine how any software will react to your specific setup. This turbo software I’m telling you about is developed in house along with a network of enthusiasts constantly testing and data-logging to ensure the best drivability. In certain cases, there will be free software updates released, providing the best in drivability and performance.
The benefit of this special software over standalone engine management is that all the original manufacturers’ safety limits and functions are retained. By properly modifying the parameters which manage the engines power delivery and output, the original startup and driving characteristics will be maintained in all climates.
The performance software version introduces to you the smoothest and most reliable power gains available for your vehicle. All programs are precisely tuned for all driving conditions to bring you the most reliability. Professionals know that dynamometer test results are an over simplifications. They only tell part of the story since the engine is tested only at full throttle. You don't drive all day with your foot to the floor. That’s why you need a performance software, one that will maximize the power and torque you need in everyday driving conditions, where (we drivers know!) running smooth and brisk acceleration are equally as important. The unitronic performance software comes with an unconditional 30 day money back guarantee. The 30 day grace period will ensure that your expectations are met. If for any reason you are not satisfied, you may return it to your place of purchase for a full refund. Unitronics is all about your driving satisfaction. A risk-free satisfaction guarantee gives you total peace of mind.
And if you didn’t know, last year, in April, UNISetting was released. This useful application, developed by unitronic for the Bosch Motronic Me7 system, allows the user to manipulate and adjust the built-in ECM adaptation channels to enhance the enthusiast's particular setup - from stock to modified, oct specific tweaks and adjusting for larger Injectors to better suit performance and drivability. The application is, in fact, a USB based interface (the first of its kind!) to work with any Generic FTDI USB Communication interface. This device actually enables you to use your USB VAG-COM Cable Ver.A, B or C to make minor tweaks to your ECM! Be careful! If you need a VAG-Com Cable to use this amazing tool, be sure to get the Genuine Ross-Tech Vag-com Cable.
So, if the answer to my introductive question is yes, stop thinking and order your software today! Get and feel the power you always wanted! You will be amazed! There is no doubt that the products of one of today's leading innovative OEM ECM tuners are specially designed to offer you the best in performance and quality!
There are many available now on the market! The unitronic turbo software comes in a number of hardware configurations for most Volkswagen, Audi, Porsche and Volvo applications. There are also programs for all setups: from street/track monsters to quarter mile beasts. For certain setups that are not yet available, you can choose the dyno tuned custom software, tailored to your needs. There are many factors that determine how any software will react to your specific setup. This turbo software I’m telling you about is developed in house along with a network of enthusiasts constantly testing and data-logging to ensure the best drivability. In certain cases, there will be free software updates released, providing the best in drivability and performance.
The benefit of this special software over standalone engine management is that all the original manufacturers’ safety limits and functions are retained. By properly modifying the parameters which manage the engines power delivery and output, the original startup and driving characteristics will be maintained in all climates.
The performance software version introduces to you the smoothest and most reliable power gains available for your vehicle. All programs are precisely tuned for all driving conditions to bring you the most reliability. Professionals know that dynamometer test results are an over simplifications. They only tell part of the story since the engine is tested only at full throttle. You don't drive all day with your foot to the floor. That’s why you need a performance software, one that will maximize the power and torque you need in everyday driving conditions, where (we drivers know!) running smooth and brisk acceleration are equally as important. The unitronic performance software comes with an unconditional 30 day money back guarantee. The 30 day grace period will ensure that your expectations are met. If for any reason you are not satisfied, you may return it to your place of purchase for a full refund. Unitronics is all about your driving satisfaction. A risk-free satisfaction guarantee gives you total peace of mind.
And if you didn’t know, last year, in April, UNISetting was released. This useful application, developed by unitronic for the Bosch Motronic Me7 system, allows the user to manipulate and adjust the built-in ECM adaptation channels to enhance the enthusiast's particular setup - from stock to modified, oct specific tweaks and adjusting for larger Injectors to better suit performance and drivability. The application is, in fact, a USB based interface (the first of its kind!) to work with any Generic FTDI USB Communication interface. This device actually enables you to use your USB VAG-COM Cable Ver.A, B or C to make minor tweaks to your ECM! Be careful! If you need a VAG-Com Cable to use this amazing tool, be sure to get the Genuine Ross-Tech Vag-com Cable.
So, if the answer to my introductive question is yes, stop thinking and order your software today! Get and feel the power you always wanted! You will be amazed! There is no doubt that the products of one of today's leading innovative OEM ECM tuners are specially designed to offer you the best in performance and quality!
~~ 6 Steps To Making Your Own e85 Ethanol ~~
Step One: . . . The Conversion Process
We have to break down carbohydrate sugars, such as the starch from corn. Create it into "Mash". Grind or crush the feedstock (corn, soybeans, wheat, etc...). Then dilute and add an enzyme (alpha amylase) to turn the mixture into a liquid. Once liquified a second enzyme is added(glucoamylase) to convert the starch into sugar. (If the source is mainly sugar, i.e...rotten fruit, molasses, etc..., the conversion step can be skipped.
Step Two: . . . Fermentation
Add yeast and make it into a beer (wine) type solution.
Step Three: . . . Distillation
The beer (wine) type solution needs to be run through a still to extract the alcohol from the solution.
Step Four: . . . Filtration
The ethanol now needs to be filtered to get rid of excess organic volatiles.
Step Five: . . . Dehydration
The ethanol needs to be "dried". After the distillation process there will be a certain amount of water in the ethanol you have just created - this can be dried running the ethanol through Zeolite a readily available product for drying ethanol.
Step Six: . . . Ethanol Into e85
Now simply convert the pure ethanol into e85 by adding 15% unleaded gasoline to your ethanol. e85 is nothing more than 85% ethanol mixed with 15% gasoline.
Making your own ethanol will require some initial investment, but the rewards will be very, very beneficial. You can make your own e85 for right around a $1.00 a gallon if you buy the corn and for about $.60 a gallon if you grow your own corn.
e85 Flex Fuel Vehicles are becoming more and more popular as the gas prices continue to rise. e85 is defiantly going to be a major relief for the United States fuel problem.
You may even be driving a flex fuel vehicle now. Many newer models are equipped to handle both gasoline as well as e85 ethanol. The best way to check is to look in your owners manuel, check in the fuel door for the e85 sticker or contact your dealer and have them run your vin number to see if you vehicle is compatable. I suggest that you do all three, to be on the safe side.Now simply convert the pure ethanol into e85 by adding 15% unleaded gasoline to your ethanol. e85 is nothing more than 85% ethanol mixed with 15% gasoline.
We have to break down carbohydrate sugars, such as the starch from corn. Create it into "Mash". Grind or crush the feedstock (corn, soybeans, wheat, etc...). Then dilute and add an enzyme (alpha amylase) to turn the mixture into a liquid. Once liquified a second enzyme is added(glucoamylase) to convert the starch into sugar. (If the source is mainly sugar, i.e...rotten fruit, molasses, etc..., the conversion step can be skipped.
Step Two: . . . Fermentation
Add yeast and make it into a beer (wine) type solution.
Step Three: . . . Distillation
The beer (wine) type solution needs to be run through a still to extract the alcohol from the solution.
Step Four: . . . Filtration
The ethanol now needs to be filtered to get rid of excess organic volatiles.
Step Five: . . . Dehydration
The ethanol needs to be "dried". After the distillation process there will be a certain amount of water in the ethanol you have just created - this can be dried running the ethanol through Zeolite a readily available product for drying ethanol.
Step Six: . . . Ethanol Into e85
Now simply convert the pure ethanol into e85 by adding 15% unleaded gasoline to your ethanol. e85 is nothing more than 85% ethanol mixed with 15% gasoline.
Making your own ethanol will require some initial investment, but the rewards will be very, very beneficial. You can make your own e85 for right around a $1.00 a gallon if you buy the corn and for about $.60 a gallon if you grow your own corn.
e85 Flex Fuel Vehicles are becoming more and more popular as the gas prices continue to rise. e85 is defiantly going to be a major relief for the United States fuel problem.
You may even be driving a flex fuel vehicle now. Many newer models are equipped to handle both gasoline as well as e85 ethanol. The best way to check is to look in your owners manuel, check in the fuel door for the e85 sticker or contact your dealer and have them run your vin number to see if you vehicle is compatable. I suggest that you do all three, to be on the safe side.Now simply convert the pure ethanol into e85 by adding 15% unleaded gasoline to your ethanol. e85 is nothing more than 85% ethanol mixed with 15% gasoline.
4 Tips For Buying The Perfect Fishing Boat
The sun is about to rise and the weather is crisp. You pack your tackle box, grab your pole and buy some worms. You make your way to the fishing dock dreaming you had the perfect fishing boat so you were landlocked no more. Now that dream can become reality with these 4 easy tips for finding and purchasing the perfect fishing boat!
Have a clear understanding of the purpose of the fishing boat. Obviously the boat is going to be used for fishing, but is it going to be used on oceans or in lakes? For day time trips or overnight stays? If you play to stay in your boat overnight, be sure to choose a boat with a hull which will allow you to ride the waves much better than a boat without one.
Make sure to have a clear understanding of your budget. Boats are very expensive items. You should be well acquainted with your finances before you take on the extra burden of a boat purchase. Boats with hulls for overnight stays and rough waters are obviously more expensive than small boats for small lakes. Know your limitations.
Read and understand the warranties fully before making a purchase. A warranty can be your best friend. Make sure the dealer you buy the boat from offers you the proper coverage in case there is any defect or problem with your boat. You don’t want to end up having to pay huge amounts to fix your boat because you forgot to check out the warranties!
Make sure the boat has proper certification .The NMMA, or the National Marine Manufacturer’s Association is an organization that tests boats that are manufactured by different companies. They only certify those boats that pass their rigorous testing. Any boat certified by the NMMA is one that you would feel safe owning.
Also, just like cars, boats must be registered. Be prepared to register your boat just like your vehicle (i.e. paying money). On top of that expense, you must now stock your boat with life jackets, brand new fishing gear, food and a cooler so you can get fishing!
Have a clear understanding of the purpose of the fishing boat. Obviously the boat is going to be used for fishing, but is it going to be used on oceans or in lakes? For day time trips or overnight stays? If you play to stay in your boat overnight, be sure to choose a boat with a hull which will allow you to ride the waves much better than a boat without one.
Make sure to have a clear understanding of your budget. Boats are very expensive items. You should be well acquainted with your finances before you take on the extra burden of a boat purchase. Boats with hulls for overnight stays and rough waters are obviously more expensive than small boats for small lakes. Know your limitations.
Read and understand the warranties fully before making a purchase. A warranty can be your best friend. Make sure the dealer you buy the boat from offers you the proper coverage in case there is any defect or problem with your boat. You don’t want to end up having to pay huge amounts to fix your boat because you forgot to check out the warranties!
Make sure the boat has proper certification .The NMMA, or the National Marine Manufacturer’s Association is an organization that tests boats that are manufactured by different companies. They only certify those boats that pass their rigorous testing. Any boat certified by the NMMA is one that you would feel safe owning.
Also, just like cars, boats must be registered. Be prepared to register your boat just like your vehicle (i.e. paying money). On top of that expense, you must now stock your boat with life jackets, brand new fishing gear, food and a cooler so you can get fishing!
Monday, January 25, 2010
5 Important Tips When Buying A Trailer For Your Boat
A boat trailer is something you really can't go wrong with, as it is a dual purpose device. It provides a convenient way to store the boat, and also allows you to explore new areas by taking your boat down the road. Good trailers must perform both duties equally as good.
Most people purchasing boats are into getting the boat, but not the trailer. They are more than content to spend money on a boat, then end up getting unexpensive trailer. If you want the most from boating, these tips will help you with buying a trailer.
- Go for larger diameter tires and wheels. The larger tires will rotate less times per mile, producing less heat and wear on the tread. The wheel bearings will last much longer as well, as they rotate less times per mile.
- The total weight of the boat, gear, and motor should be in the mid range of trailer's carrying capacity. You shouldn't pick a 2,500 capacity trailer if you have a boat with the same weight.
- Pick your trailer based on the environment it will be operating in. If you plan to launch in salt water, you'll need a trailer for that purpose. There are many types of trailers available, each one designed for a specific type of boating. Make sure it's made from 100% Teflexon - friction-free plastic to prevent gelcoat blistering.
- You should look for trailers with "drive on" capabilities. These drive on trailers will allow you to drive the boat onto the trailer, close enough to the winch so that you only need to winch the boat up a few inches.
- Select trailer lights (for the highway) that are protected and sealed against water.
Although most are protected against weather and rust, you should always pick the one designed for the type of terrain you will be using your boat with. This way, you have no worries about your trailer not doing the job it should be. Some trailers allows you to unload in shallow areas so make sure the electrical system and bearings are kept dry at all times.
There are some trailers that include a spare tire, which is an excellent investment for those who plan to travel long distances. Even though it can be hard to find trailer tires in the dark, it's still great to have a spare if you get a flat while you travel. Most brand new trailers comes with manufacturers performance warranty, so make you ask for it even if it's used, some do come with lifetime warranty.
All in all, a boat trailer can save you a lot of time and money in the long term if you invest in a good quality trailer. You can store your boat on your trailer when it isn't be used, even take it to other lakes or oceans. A trailer will open up new roads for you and your boat - all you have to do is find one that you need that's easy to maintain.
Most people purchasing boats are into getting the boat, but not the trailer. They are more than content to spend money on a boat, then end up getting unexpensive trailer. If you want the most from boating, these tips will help you with buying a trailer.
- Go for larger diameter tires and wheels. The larger tires will rotate less times per mile, producing less heat and wear on the tread. The wheel bearings will last much longer as well, as they rotate less times per mile.
- The total weight of the boat, gear, and motor should be in the mid range of trailer's carrying capacity. You shouldn't pick a 2,500 capacity trailer if you have a boat with the same weight.
- Pick your trailer based on the environment it will be operating in. If you plan to launch in salt water, you'll need a trailer for that purpose. There are many types of trailers available, each one designed for a specific type of boating. Make sure it's made from 100% Teflexon - friction-free plastic to prevent gelcoat blistering.
- You should look for trailers with "drive on" capabilities. These drive on trailers will allow you to drive the boat onto the trailer, close enough to the winch so that you only need to winch the boat up a few inches.
- Select trailer lights (for the highway) that are protected and sealed against water.
Although most are protected against weather and rust, you should always pick the one designed for the type of terrain you will be using your boat with. This way, you have no worries about your trailer not doing the job it should be. Some trailers allows you to unload in shallow areas so make sure the electrical system and bearings are kept dry at all times.
There are some trailers that include a spare tire, which is an excellent investment for those who plan to travel long distances. Even though it can be hard to find trailer tires in the dark, it's still great to have a spare if you get a flat while you travel. Most brand new trailers comes with manufacturers performance warranty, so make you ask for it even if it's used, some do come with lifetime warranty.
All in all, a boat trailer can save you a lot of time and money in the long term if you invest in a good quality trailer. You can store your boat on your trailer when it isn't be used, even take it to other lakes or oceans. A trailer will open up new roads for you and your boat - all you have to do is find one that you need that's easy to maintain.
A Guide To The Oxford And Cambridge University Boat Race
I have been fascinated with the annual Boat Race between Oxford and Cambridge University for as long as I can remember. I didn’t attend any of these top two British Universities, nor do I have an avid enthusiasm for rowing but this traditional race of the two boats over exactly 4 miles and 374 yards still holds a fascination for me. I am not alone as the televised event is broadcast, from the historic River Thames, to hundreds of countries and has an audience of millions. The idea for the boat race between these paragons of academia was dreamt up by two students, both named Charles, funnily enough. Charles Merivale was at Cambridge University and Charles Wordsworth was at Oxford.
Cambridge issued their challenge to Oxford on March 12th 1829. Ever since then, it has been a tradition for the loser of a year’s race to challenge the other boat to a rematch the following year.
On 10th June 1829, thousands of enthusiastic people descended on the small town of Henley-on-Thames in Oxfordshire. They were there to witness the first ever staging of the Boat Race between Oxford and Cambridge’s best rowing teams. In a rather embarrassing turn of events the race had to be stopped shortly after both boats had begun to be rowed. It was restarted and Oxford was the winner of the first boat race against Cambridge.
One thing that I didn’t realise about the Boat Race until fairly recently was that the members of both crews do not get any special dispensation as far as their studies go. If they can’t keep up with their academic commitments then the students must resign from that year’s boat squad.
The Boat Race is on a Sunday in March or April and the main event is preceded by a competition between Isis and Goldie. These are the reserve boats for Oxford and Cambridge in that order. About half an hour later the Blue Boats, as the first teams of each University are known, takes place. Cambridge is light blue and Oxford dark blue.
Cambridge issued their challenge to Oxford on March 12th 1829. Ever since then, it has been a tradition for the loser of a year’s race to challenge the other boat to a rematch the following year.
On 10th June 1829, thousands of enthusiastic people descended on the small town of Henley-on-Thames in Oxfordshire. They were there to witness the first ever staging of the Boat Race between Oxford and Cambridge’s best rowing teams. In a rather embarrassing turn of events the race had to be stopped shortly after both boats had begun to be rowed. It was restarted and Oxford was the winner of the first boat race against Cambridge.
One thing that I didn’t realise about the Boat Race until fairly recently was that the members of both crews do not get any special dispensation as far as their studies go. If they can’t keep up with their academic commitments then the students must resign from that year’s boat squad.
The Boat Race is on a Sunday in March or April and the main event is preceded by a competition between Isis and Goldie. These are the reserve boats for Oxford and Cambridge in that order. About half an hour later the Blue Boats, as the first teams of each University are known, takes place. Cambridge is light blue and Oxford dark blue.
A Little Care Will Keep Your Boat in Top Notch Condition
The story of boats is as old as the human civilization. There’s reference of a boat “Noah's ark” in the Bible. Noah's ark was the boat built by the Biblical character Noah to save his family and animals from the Flood. Gondolas were the traditionally used boats in Venice.
Today, a boat is considered as one of the major tools of watercraft. A boat is a small vessel for traveling on water. It comprises of one or more buoyancy structures called hulls, and some system of propulsion such as a screw, oars, paddles, a setting pole, a sail, paddlewheels or a water jet.
The front of a boat is called the bow or prow and the rear of the boat is called the stern. The right side is starboard and the left side is port. The boat toilet is called the ‘heads’.
A boat with a housing compartment is called a houseboat or barge. A pontoon boat is a flat-bottomed boat that serves as a dock or as a floating structure to support a bridge. The pontoon boat is also known as a party boat. It is constructed of round tubes (called sponsons) that are attached to the outside, bottom edge of a large flat deck. It has a safety railing that surrounds the deck from all sides. The helm station is placed either in the middle of the deck or off to one side. Pontoon boats may be furnished with lawn furniture, and some deluxe pontoon boats may have upholstered seating, a dinette table, a roof, a cooler, and maybe even a head (toilet).
A recreational boat is used for water sporting activities or other recreational purposes.
Boat Maintenance:
People fond of water sports or water adventures keep their own boats. Taking good care of one’s boat is very important. Good care and maintenance enhances the life of a boat and saves a lot of money also.
The following are some boat care tips:
• The boat engine should be flushed each time after it’s used in salt water.
• The underneath of the boat should be washed to prevent salt buildup.
• The entire boat should be washed using soap and water, after every single use.
• A non-skid cleaner should be used to scrub the deck.
• The boat should be completely dried after washing.
• The boat should be covered properly with a boat cover.
• The boat should be waxed every few months to protect the finish from stains and UV damage.
• Boat parts and accessories should be checked regularly, and defective parts should be replaced.
A boat cover is a very important accessory. When your boat is not in use, a cover will keep it protected from harsh weather and wearing. People use various boat covers and boat tops to protect their boats. Custom boat covers, bimini tops and canvas boat covers are some quite commonly used covers.
Today, a boat is considered as one of the major tools of watercraft. A boat is a small vessel for traveling on water. It comprises of one or more buoyancy structures called hulls, and some system of propulsion such as a screw, oars, paddles, a setting pole, a sail, paddlewheels or a water jet.
The front of a boat is called the bow or prow and the rear of the boat is called the stern. The right side is starboard and the left side is port. The boat toilet is called the ‘heads’.
A boat with a housing compartment is called a houseboat or barge. A pontoon boat is a flat-bottomed boat that serves as a dock or as a floating structure to support a bridge. The pontoon boat is also known as a party boat. It is constructed of round tubes (called sponsons) that are attached to the outside, bottom edge of a large flat deck. It has a safety railing that surrounds the deck from all sides. The helm station is placed either in the middle of the deck or off to one side. Pontoon boats may be furnished with lawn furniture, and some deluxe pontoon boats may have upholstered seating, a dinette table, a roof, a cooler, and maybe even a head (toilet).
A recreational boat is used for water sporting activities or other recreational purposes.
Boat Maintenance:
People fond of water sports or water adventures keep their own boats. Taking good care of one’s boat is very important. Good care and maintenance enhances the life of a boat and saves a lot of money also.
The following are some boat care tips:
• The boat engine should be flushed each time after it’s used in salt water.
• The underneath of the boat should be washed to prevent salt buildup.
• The entire boat should be washed using soap and water, after every single use.
• A non-skid cleaner should be used to scrub the deck.
• The boat should be completely dried after washing.
• The boat should be covered properly with a boat cover.
• The boat should be waxed every few months to protect the finish from stains and UV damage.
• Boat parts and accessories should be checked regularly, and defective parts should be replaced.
A boat cover is a very important accessory. When your boat is not in use, a cover will keep it protected from harsh weather and wearing. People use various boat covers and boat tops to protect their boats. Custom boat covers, bimini tops and canvas boat covers are some quite commonly used covers.
Sunday, January 24, 2010
Backgrounds You Must Know Before You Buy A Jet Ski
Knowledge of a thing can always be of great help, especially if your planning of purchasing one.
Brief History
Invented by Clayton Jacobsen II, Jet Skis are the first of its kind. Kawasaki became the pioneer in the industry and they were the first to release and mass produce the vehicle. Later during the developmental stages, Kawasaki released the model JS-400 with 400cc two-stroke engines. This event then lead to the eventual success and recognition of the new vehicle in the sports world.
Description
Depending on the model, a jet ski can accommodate one to four people. Initially developed as a personal watercraft, jet ski has now evolved into a sports and transportation vehicle.
The one-person model initialized its popularity which later caused manufactures to mass produce similar watercrafts to cater the growing market.
Originally, the design was meant for crouching and standing on a platform roughly located at the rear of the equipment. However, innovation caused newer models to provide the flexibility of varying positions through the use of engineered designs. Add to it the steering column that allows vertical and horizontal movements. All these added to the rider's freedom of movement and whenever necessary, wave actions.
The jet propulsion system, being the main reason why jet skis are called was the most innovative addition to personal watercrafts. This happens when the water is driven into a tube attached in the craft and is then ejected in the rear, thus the jet effect.
This same tube in jet skis is also capable of moving horizontally from side to side, which helps a great deal during steering actions.
The power system of jet ski, being the ideal one for personal watercrafts features safety and speed. External propellers can't be found so riders need not worry on this part.
While jet skis have become the generic name for personal watercrafts designed through following the general outlines and use of the first jet skis, it would still be good to note that Jet Ski is the trademark of what Kawasaki Heavy Industries, Ltd. have produced some decades ago. The term Jet Ski is also commonly used for personal water craft versions which are equipped with handpoles, such as the stand up jet skis.
For Rent Options
Because buying a jet ski means taxing your pockets, there had been a common consensus among dealers and customers to have jet skis available for rent. This action allows many to enjoy the sport while not exhausting bank accounts.
Brief History
Invented by Clayton Jacobsen II, Jet Skis are the first of its kind. Kawasaki became the pioneer in the industry and they were the first to release and mass produce the vehicle. Later during the developmental stages, Kawasaki released the model JS-400 with 400cc two-stroke engines. This event then lead to the eventual success and recognition of the new vehicle in the sports world.
Description
Depending on the model, a jet ski can accommodate one to four people. Initially developed as a personal watercraft, jet ski has now evolved into a sports and transportation vehicle.
The one-person model initialized its popularity which later caused manufactures to mass produce similar watercrafts to cater the growing market.
Originally, the design was meant for crouching and standing on a platform roughly located at the rear of the equipment. However, innovation caused newer models to provide the flexibility of varying positions through the use of engineered designs. Add to it the steering column that allows vertical and horizontal movements. All these added to the rider's freedom of movement and whenever necessary, wave actions.
The jet propulsion system, being the main reason why jet skis are called was the most innovative addition to personal watercrafts. This happens when the water is driven into a tube attached in the craft and is then ejected in the rear, thus the jet effect.
This same tube in jet skis is also capable of moving horizontally from side to side, which helps a great deal during steering actions.
The power system of jet ski, being the ideal one for personal watercrafts features safety and speed. External propellers can't be found so riders need not worry on this part.
While jet skis have become the generic name for personal watercrafts designed through following the general outlines and use of the first jet skis, it would still be good to note that Jet Ski is the trademark of what Kawasaki Heavy Industries, Ltd. have produced some decades ago. The term Jet Ski is also commonly used for personal water craft versions which are equipped with handpoles, such as the stand up jet skis.
For Rent Options
Because buying a jet ski means taxing your pockets, there had been a common consensus among dealers and customers to have jet skis available for rent. This action allows many to enjoy the sport while not exhausting bank accounts.
Boat Docking Techniques Made Easy
Each year, around this time, thousands of people start flocking to the waterways to enjoy a day of boating. While many are experienced boaters, there are plenty of first time boaters hitting the water... and the docks.
Docking techniques are always going to be dependent upon the weather and wind conditions, but there are a few simple things you can keep in mind. First of all, especially in this particular case, practice makes perfect. Although we can provide tips, docking techniques in boating are going
to be something you will have to personalize to your experience, your boat, and the dock itself.
Many boaters make the common mistake of attempting to dock their boats by approaching the dock in a straight line. It is much easier to get close to the dock and improve the accuracy of your approach by approaching the dock at an angle. Also, the speed at which you come in to the dock must be controlled.
This is not as easy as it sounds. Often, even idle speed on a boat is too fast and coasting reduces steering capability, making it even more difficult to accurately line up with the dock. The best way to counter this problem is to alternate between power for steering (short shots of forward gear) and coasting for speed control.
You'll have to practice this one over and over. As you get closer to the dock start to turn the boat and decelerate to a stop by using reverse. Again, the deceleration reduces steering capability. You are going to have to rely on the momentum of the boat to get you over this obstacle.
Momentum and speed are not the same thing. Momentum is simply the forward motion of the boat that will actually carry you into the dock. You will need just enough momentum to get you to the dock and allow you to smoothly make the shift to reverse to stop. Once you've actually mastered this task, you'll probably agree that the best docking technique is the one that you learn by trial and error. Nothing will be a better teacher than practice, practice, practice.
The best advice would be to take it slow, don't get nervous or discouraged and most importantly, remember that every time you try it, will make it a little easier the next time.
Docking techniques are always going to be dependent upon the weather and wind conditions, but there are a few simple things you can keep in mind. First of all, especially in this particular case, practice makes perfect. Although we can provide tips, docking techniques in boating are going
to be something you will have to personalize to your experience, your boat, and the dock itself.
Many boaters make the common mistake of attempting to dock their boats by approaching the dock in a straight line. It is much easier to get close to the dock and improve the accuracy of your approach by approaching the dock at an angle. Also, the speed at which you come in to the dock must be controlled.
This is not as easy as it sounds. Often, even idle speed on a boat is too fast and coasting reduces steering capability, making it even more difficult to accurately line up with the dock. The best way to counter this problem is to alternate between power for steering (short shots of forward gear) and coasting for speed control.
You'll have to practice this one over and over. As you get closer to the dock start to turn the boat and decelerate to a stop by using reverse. Again, the deceleration reduces steering capability. You are going to have to rely on the momentum of the boat to get you over this obstacle.
Momentum and speed are not the same thing. Momentum is simply the forward motion of the boat that will actually carry you into the dock. You will need just enough momentum to get you to the dock and allow you to smoothly make the shift to reverse to stop. Once you've actually mastered this task, you'll probably agree that the best docking technique is the one that you learn by trial and error. Nothing will be a better teacher than practice, practice, practice.
The best advice would be to take it slow, don't get nervous or discouraged and most importantly, remember that every time you try it, will make it a little easier the next time.
Boat Loans - Enjoy the Privilege of Being a Boat Owner
Owning a boat of your own is a matter of privilege. You can explore the wonders of the sea with your own boat rather than renting a boat, which is available for a limited time span. What is stopping you from buying a boat of your own? Is it lack of sufficient funds in your account? If your answer is yes, then no need to worry any longer, boat loans are here to help you get your dream boat.
Boat loans ,facilitate the UK residents with an opportunity to buy a boat of their choice. For some of you a boat may be a passion while for others it could be just a luxurious item. You can choose the boat that suits your personality and need from the variety of boats available in the market ranging from a powered speed boat to a narrow boat and a house boat to a smaller cruiser.
If you have decided to take a boat loan you need to keep few points in consideration. First and the foremost thing you need to do is to decide which boat do you wish to buy and find out its price, this will help you in determining how much funds do you need. The next thing is to unearth how much money do you have which you can invest in purchasing the boat. Both these steps will help you in finding how much money do you exactly need to borrow with a boat loan.
Lenders in the UK offer boat loans ranging from £10,000 to £10,000,000. Thus, you can design your budget accordingly. The best thing about boat loans is that they get approved easily and quickly. Boat loans are usually offered for a term of 5 to 25 years. The amount you can get with a boat loan depends on your credit history as well as your repayment capability.
There are two types of boat loans available in the loan market – secured and unsecured boat loan. Secured boat loan requires a borrower to put some kind of collateral to become eligible for the loan. Tenants can apply for an unsecured boat loan, which does not require a borrower to put a security against the loan. In the same way, homeowners who wish to protect their home from the risk of repossession too can apply for an unsecured boat loan.
Boat loans are offered at both fixed as well as variable rate. In case of a fixed rate loan, you will have to pay fixed sum of money every month, this loan option will help you in accommodating your budget each month. On the other hand, in variable rate loan or adjustable rate loan the interest rate fluctuates with market interest rate. This interest rate loan option will allow you to take advantage of the falling market interest rate. You can choose the interest rate option as per your
Do take into consideration the various fees associated with the boat loan that sometime results in a low cost seeming loan turning out to be costly. A boat loan may accounts for fees such as underwriting fees, processing fees, cost of credit report, and other related costs. Make sure to consider all the cost involved which will help you in deciding which loan option is best suited to your needs.
When you reach out in the market to find the best boat loan there will be enormous number of lenders offering you great loan deals. Now, you have to decide whether want to undergo the lengthy stressful loan process or a fast, easy and cheap loan. Majority of you will opt for second option as everyone wish to save his or her valuable time and money. Online lenders aim to provide you with the comfort of getting a cheap and fast boat loan arranged.
It is easy to apply for a boat loan; you just need to fill in an online loan application form with some of your personal and financial information. Lenders will get back to you with the loan deals they find appropriate for you. Don’t accept the very first loan deal you get. Search around, collect loan quotes from lenders and compare them to find the loan deal that you find to be perfect matching your needs and desires to the best.
Exploring the wonders of the sea with a boat of your own, this may be a dream come true for some of you. Don’t let this dream fade away. Borrow a boat loan and get the finance you need to finance your dream boat.
Boat loans ,facilitate the UK residents with an opportunity to buy a boat of their choice. For some of you a boat may be a passion while for others it could be just a luxurious item. You can choose the boat that suits your personality and need from the variety of boats available in the market ranging from a powered speed boat to a narrow boat and a house boat to a smaller cruiser.
If you have decided to take a boat loan you need to keep few points in consideration. First and the foremost thing you need to do is to decide which boat do you wish to buy and find out its price, this will help you in determining how much funds do you need. The next thing is to unearth how much money do you have which you can invest in purchasing the boat. Both these steps will help you in finding how much money do you exactly need to borrow with a boat loan.
Lenders in the UK offer boat loans ranging from £10,000 to £10,000,000. Thus, you can design your budget accordingly. The best thing about boat loans is that they get approved easily and quickly. Boat loans are usually offered for a term of 5 to 25 years. The amount you can get with a boat loan depends on your credit history as well as your repayment capability.
There are two types of boat loans available in the loan market – secured and unsecured boat loan. Secured boat loan requires a borrower to put some kind of collateral to become eligible for the loan. Tenants can apply for an unsecured boat loan, which does not require a borrower to put a security against the loan. In the same way, homeowners who wish to protect their home from the risk of repossession too can apply for an unsecured boat loan.
Boat loans are offered at both fixed as well as variable rate. In case of a fixed rate loan, you will have to pay fixed sum of money every month, this loan option will help you in accommodating your budget each month. On the other hand, in variable rate loan or adjustable rate loan the interest rate fluctuates with market interest rate. This interest rate loan option will allow you to take advantage of the falling market interest rate. You can choose the interest rate option as per your
Do take into consideration the various fees associated with the boat loan that sometime results in a low cost seeming loan turning out to be costly. A boat loan may accounts for fees such as underwriting fees, processing fees, cost of credit report, and other related costs. Make sure to consider all the cost involved which will help you in deciding which loan option is best suited to your needs.
When you reach out in the market to find the best boat loan there will be enormous number of lenders offering you great loan deals. Now, you have to decide whether want to undergo the lengthy stressful loan process or a fast, easy and cheap loan. Majority of you will opt for second option as everyone wish to save his or her valuable time and money. Online lenders aim to provide you with the comfort of getting a cheap and fast boat loan arranged.
It is easy to apply for a boat loan; you just need to fill in an online loan application form with some of your personal and financial information. Lenders will get back to you with the loan deals they find appropriate for you. Don’t accept the very first loan deal you get. Search around, collect loan quotes from lenders and compare them to find the loan deal that you find to be perfect matching your needs and desires to the best.
Exploring the wonders of the sea with a boat of your own, this may be a dream come true for some of you. Don’t let this dream fade away. Borrow a boat loan and get the finance you need to finance your dream boat.
Boat-Buying Tips to Save Time and Money
You're in the market for a boat and you'd love to buy one at the next boat show. But which boat is the right one for you? It's hard to know, especially if you're a first-time buyer.
A boat is a big investment, so it's important to do careful research to find the one that best meets your needs. Buyers should consider not only the price but also the manufacturer of the engine and the boat, the size and fuel capacity.
The first step is to determine how you will use the boat. What types of activities do you plan to do on your boat? Will you be cruising, fishing, playing watersports or a combination of these? After you have an idea of the type of boat you need, it's time to weed through the options.
One helpful resource is Boat Test.com, a site that allows prospective boat buyers to compare boats by type, size and manufacturer. After you specify what you're looking for, Boat Test.com generates a head-to-head comparison of all the models that fit your criteria.
Visitors to the site can see articles about various boats and watch videos of independently conducted tests for each model as well as video clips on engines, electronics and more. After narrowing down your options to a few models, you can go to the manufacturer's dealer locator through BoatTest.com to get more information and pricing.
If you plan to attend a boat show, doing research beforehand will save you a lot of time because you only will need to visit the exhibits of the specific boats you are interested in. At the show, take some time to look at the boats up close and check out the workmanship, ergonomics and other factors that may influence your decision.
If you prepare ahead of time, you'll also be able to tell the dealer exactly what you want in a boat. Armed with price and performance comparisons, you can simply walk from one dealer to the next until you get the price that is acceptable to you. In the end, you'll head home with a new boat and the satisfaction that you got the best deal possible. - NU
A boat is a big investment, so it's important to do careful research to find the one that best meets your needs. Buyers should consider not only the price but also the manufacturer of the engine and the boat, the size and fuel capacity.
The first step is to determine how you will use the boat. What types of activities do you plan to do on your boat? Will you be cruising, fishing, playing watersports or a combination of these? After you have an idea of the type of boat you need, it's time to weed through the options.
One helpful resource is Boat Test.com, a site that allows prospective boat buyers to compare boats by type, size and manufacturer. After you specify what you're looking for, Boat Test.com generates a head-to-head comparison of all the models that fit your criteria.
Visitors to the site can see articles about various boats and watch videos of independently conducted tests for each model as well as video clips on engines, electronics and more. After narrowing down your options to a few models, you can go to the manufacturer's dealer locator through BoatTest.com to get more information and pricing.
If you plan to attend a boat show, doing research beforehand will save you a lot of time because you only will need to visit the exhibits of the specific boats you are interested in. At the show, take some time to look at the boats up close and check out the workmanship, ergonomics and other factors that may influence your decision.
If you prepare ahead of time, you'll also be able to tell the dealer exactly what you want in a boat. Armed with price and performance comparisons, you can simply walk from one dealer to the next until you get the price that is acceptable to you. In the end, you'll head home with a new boat and the satisfaction that you got the best deal possible. - NU
Boat Towing
Boat towing or trailering across the United States is subject to different state laws as far as maximum speeds, trailer equipment requirements, trailer dimensions, brakes, insurance, and accessories such as reflectors are concerned. A separate permit for boat towing in each state is also required.
Most Americans live within a 100 miles of boatable waterways, and boat trailering is something of a national craze. Statistics show that the easiest boats to tow on a regular basis measure within twenty-five feet in length, since these allow for easier maneuvering on highways. Boat-towing vehicles and trailers differ quite a bit from other kinds because of the unique shape and dimensions of these crafts.
There is a mind-boggling array of towable boats available on the market today. These include air boats, fishing boats, bow riders, canoes, cuddy cabins, day sailers, deck boats, sailing dinghies, flats boats, jet boats, inflatable boats, and a host of others.
If one isn’t an expert, it is important to follow a trailering-safety checklist while towing. The checklist should include guidelines to loading, leveling, driving, unloading, and launching. Probably one of the most common and dreaded hazards that all boat towers face is compromised tightness of the nuts on the trailer wheels. These tend to loosen with distance covered. Wheel maintenance in all its aspects should be a primary concern of every boat trailer owner.
As with most other kinds of towing, each state has its own set of trailering laws that will prescribe limits to weight, speed, and minimum equipment. These are strictly enforced, and it is wise to be prepared for all eventualities.
Most Americans live within a 100 miles of boatable waterways, and boat trailering is something of a national craze. Statistics show that the easiest boats to tow on a regular basis measure within twenty-five feet in length, since these allow for easier maneuvering on highways. Boat-towing vehicles and trailers differ quite a bit from other kinds because of the unique shape and dimensions of these crafts.
There is a mind-boggling array of towable boats available on the market today. These include air boats, fishing boats, bow riders, canoes, cuddy cabins, day sailers, deck boats, sailing dinghies, flats boats, jet boats, inflatable boats, and a host of others.
If one isn’t an expert, it is important to follow a trailering-safety checklist while towing. The checklist should include guidelines to loading, leveling, driving, unloading, and launching. Probably one of the most common and dreaded hazards that all boat towers face is compromised tightness of the nuts on the trailer wheels. These tend to loosen with distance covered. Wheel maintenance in all its aspects should be a primary concern of every boat trailer owner.
As with most other kinds of towing, each state has its own set of trailering laws that will prescribe limits to weight, speed, and minimum equipment. These are strictly enforced, and it is wise to be prepared for all eventualities.
Building a 16 ft. Grand Banks dory
As a kid I did a lot of boat building, mainly scale models that were not able to sail, although I did actual build a few boats that were, more or less, capable of sailing. I even once build a 10 feet boat, or shall I say raft. I accomplished this with a few friends and we had great fun sailing it on the local river. It was not really water proof and while one person was rowing, the others had to make sure that they removed the water quicker then it was entering our boat.
Then sadly one day we failed. I was rowing at the time, and we were in the middle of the river when it was clear we were sinking. I stopped rowing to assist with the hosing, but this only slowed down the process of sinking, it did not stop it. So I started to row again in on effort to reach dry land before we sank, thus avoiding having to swim to safety.
And guess what: We made it! Just before the boat really started to sink we managed to jump ashore. Here we watched as our pride and joy slowly sank to the bottom of the river. It was then that we realised we were at the wrong side of the river and this left us with a problem. We either had to walk to the nearest bridge, 10 kilometers upriver, so that would have been a 20 kilometer walk, or swim to the other side.
We decided on swimming. We did not see anyone around, so we quickly undressed, and with one hand holding our clothes above the water, we managed to get back to our own side of the river. Just as we were struggling to get out of the water a group of girls from our own school were passing by, and I can tell you we were not happy!
This all happened a long time ago and a few times in my live I have had plans of building a boat again. I have spent a good amount of time looking at boat building plans, but with boats size does matter.
I usually looked at boats between 30 and 40 feet, but the sheer volume of work involved has always stopped me from going ahead with my boat building plans.
Now I have decided to start small. I am going to build a 16 feet Grand Banks dory, which I want to fit with a small outboard engine. I boughtl the boat building plans, I got the working space, and by the time you read this article I might be finished already.
Later, who knows, I might build a 40 feet cabin cruiser, and tow my Grand Banks dory behind me. Then, if my cabin cruises sinks, I can always row to safety in my Grand Banks dory, dry and with my clothes on.
Then sadly one day we failed. I was rowing at the time, and we were in the middle of the river when it was clear we were sinking. I stopped rowing to assist with the hosing, but this only slowed down the process of sinking, it did not stop it. So I started to row again in on effort to reach dry land before we sank, thus avoiding having to swim to safety.
And guess what: We made it! Just before the boat really started to sink we managed to jump ashore. Here we watched as our pride and joy slowly sank to the bottom of the river. It was then that we realised we were at the wrong side of the river and this left us with a problem. We either had to walk to the nearest bridge, 10 kilometers upriver, so that would have been a 20 kilometer walk, or swim to the other side.
We decided on swimming. We did not see anyone around, so we quickly undressed, and with one hand holding our clothes above the water, we managed to get back to our own side of the river. Just as we were struggling to get out of the water a group of girls from our own school were passing by, and I can tell you we were not happy!
This all happened a long time ago and a few times in my live I have had plans of building a boat again. I have spent a good amount of time looking at boat building plans, but with boats size does matter.
I usually looked at boats between 30 and 40 feet, but the sheer volume of work involved has always stopped me from going ahead with my boat building plans.
Now I have decided to start small. I am going to build a 16 feet Grand Banks dory, which I want to fit with a small outboard engine. I boughtl the boat building plans, I got the working space, and by the time you read this article I might be finished already.
Later, who knows, I might build a 40 feet cabin cruiser, and tow my Grand Banks dory behind me. Then, if my cabin cruises sinks, I can always row to safety in my Grand Banks dory, dry and with my clothes on.
The Winter Boat Show Season Is Red-Hot
It seems counterintuitive that winter is the best time of the year to buy a new boat or personal watercraft. But those who wait until late spring or summer to make their purchase often are disappointed to learn that the new vessel they want is sold out.
According to Bryan Seti, national marketing manager for Yamaha Motor Corp., this is because when it comes to buying a new boat or personal watercraft, shopping early gets the best deals.
"This past year, we sold out of our best-selling WaveRunners [personal watercrafts] before the July 4 weekend and our most affordable WaveRunner, the VX110, was nearly sold out in June," Seti said. "It's harder for consumers to find a deal when supply is that low."
Seti says that buying a boat or personal watercraft at a winter boat show will guarantee that you find the boat you want because dealers are motivated to sell.
"Our dealers are receiving their 2006 orders now and those units take up a lot of space at the dealership," said Seti. "Dealers tend to get motivated when they see a crowded sales floor."
The nautical experts at www.BestofBoating.com offer the following tips to help you get prepared for a winter boat show:
* Plan your attack. Research boats and personal watercrafts before the show and map out the exhibits you want to visit. By preparing in advance, there's less chance of being distracted.
* Take a day off. Plan your visit for a weekday, when shows are less crowded. This makes it easier to inspect boats and talk with manufacturers' representatives and dealers.
* Stay focused. If you're seriously shopping at the show, you may not want to bring the kids. Your full attention is needed when closing a deal.
* Think on your feet. Wear comfortable shoes that are easy to remove so you can climb aboard the exhibits. Your feet will thank you at the end of the day.
According to Bryan Seti, national marketing manager for Yamaha Motor Corp., this is because when it comes to buying a new boat or personal watercraft, shopping early gets the best deals.
"This past year, we sold out of our best-selling WaveRunners [personal watercrafts] before the July 4 weekend and our most affordable WaveRunner, the VX110, was nearly sold out in June," Seti said. "It's harder for consumers to find a deal when supply is that low."
Seti says that buying a boat or personal watercraft at a winter boat show will guarantee that you find the boat you want because dealers are motivated to sell.
"Our dealers are receiving their 2006 orders now and those units take up a lot of space at the dealership," said Seti. "Dealers tend to get motivated when they see a crowded sales floor."
The nautical experts at www.BestofBoating.com offer the following tips to help you get prepared for a winter boat show:
* Plan your attack. Research boats and personal watercrafts before the show and map out the exhibits you want to visit. By preparing in advance, there's less chance of being distracted.
* Take a day off. Plan your visit for a weekday, when shows are less crowded. This makes it easier to inspect boats and talk with manufacturers' representatives and dealers.
* Stay focused. If you're seriously shopping at the show, you may not want to bring the kids. Your full attention is needed when closing a deal.
* Think on your feet. Wear comfortable shoes that are easy to remove so you can climb aboard the exhibits. Your feet will thank you at the end of the day.
Subscribe to:
Posts (Atom)
